Activity
 
Notifications
Clear all
michaelc
michaelc
@michaelc
Noble Member
Joined: May 30, 2007
Topics: 128 / Replies: 1412
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

I have 3 large trees that have single color LED strands in them in a superstring configuration. I have some RGB elements scattered around the yard so...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

I'm doing some math. According to the specs, these little units put out 1-2Amps of 12V. Assuming I run all my pixels at 50% brightness and a typical...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

The popping sound you just heard is my head exploding. So extrapolating your last two paragraphs, I can run 200,090 pixels/frame but there are 20 fra...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

Okay. I've got 9 ESPixelSticks and 4 RENEsp boards programmed. I'm realizing that the crappy old router I'm using is a bit flaky so I'd like to get ...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

sporadic wrote:I'm including the .efu files in the firmware release zip. You just upload them via the admin page and that's it. There are two in the...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

Maybe I'm just not understanding. I was able to use the new flash tool to program all my boards with 1.x with my usb and FTDI board wired up. I then...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

Will there be the ability to set as starting channel number on this in the near future. I have a bunch of smaller props that I was hoping to have un...

10 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

oceanwanderlust wrote:How many pixels can this thing do? For some reason, I thought it was going to be 4x170=680, but Xlights/Nutcracker seems to be...

10 years ago
Reply
RE: ESPixelStick V2 Group Buy - E1.31 WiFi Pixel Controller kit

They actually fit in 2 orientations and you have to wiggle them in to seat them all the way down to the board

10 years ago
Forum
Reply
RE: DIYLEDExpress E1.31 Bridge Firmware 4.01

I did not. I changed it on the FPP not the E.131. Let me try that.

10 years ago
Reply
RE: DIYLEDExpress E1.31 Bridge Firmware 4.01

I know this is an old thread but I have been running my E1.31 in UNICAST mode for the last year flawlessly with an FPP. Is there something special I ...

10 years ago
Reply
RE: ESPixelStick Flash Tool

One other thing. How does the OTA work? After uploading to the units, I click on the Build EFU. What do you do with that file?

10 years ago
Reply
RE: ESPixelStick Flash Tool

The enhancement I'd like to see is the ability to set the IP address from the screen. Right now I am hard coding it in the config.json after every bo...

10 years ago
Reply
RE: ESPixelStick Flash Tool

Wouldn't you just set the order in your software with the channel assignment? mrGrumpy wrote:Sporadic, great tool for these ESPixelSticks, but I have ...

10 years ago
Reply
RE: ESPixelStick Flash Tool

A thing of beauty is a joy forever!Sent from my bat phone using Tapatalk

10 years ago
Page 5 / 103
Share: