Jerry-Rigs wrote:The ESPixelStick is a high interest item. This generically named thread has a lot of specific useful information that is jumbled together and difficult to find.Can we please start new topic specific threads as needed? Like "How many ESPixelSticks can I control from a single hotspot", "2017 ESPixelStick Group Buy?", "Why did the ESPixelStick cross the road?", etc.
Question for the mods: Does the ESPixelStick rate its own category under "Hardware"?
It would probably be better as part of a wiki for them that can be updated with new Q/A as they come up.
Why did the ESPixelStick cross the road?
To have lunch with the chicken or is that to have the chicken for lunch. Hmm, you choose.
Not sure where you are getting your numbers, but the ESPixelStick's output supports 4 Universes (680) of Pixels or 2720 channels, Multicast or Unicast, Sproadic has even pushed it to 720 pixels
Pixel limitations are mostly based upon your desired refresh rate, around 680 pixels (4 universes) for a 25ms E1.31 source rate.
kev wrote:I am still a bit confused as to why to choose multicast. My understanding is multicast is limited to one universe (512 channels) and is broadcast to multiple ESPixelsticks. Is this because I want many elements using the same data, like a lot of mini trees showing the same lights? Or are the different ESPixilstrips programmed to use only a subset of the universe? Like maybe 50 pixels on each mini tree, therefore able to send unique data to the three different trees?
Ruppro wrote:Not sure where you are getting your numbers,
680 pixels @ 25ms is a limit defined by the ws2811 protocol itself, you can't push out more pixels than that number/rate no matter what controller happens to be.
That said, I have one ESP that drove 598 pixels in my display and I was not able to get any good results with a 25ms refresh rate and had to drop down to 50ms. Sure Sporadic could push more pixels in a sterile lab environment, but real world with multiple controllers introduces other issues.
I am still a bit confused as to why to choose multicast.
Choose multicast if you have multiple ESP controllers all getting data from the same universe, and then the universe will only be sent out once over the WIFI. Otherwise use unicast.
madsci1016 wrote:680 pixels @ 25ms is a limit defined by the ws2811 protocol itself, you can't push out more pixels than that number/rate no matter what controller happens to be.
Just curious if you could run two instances of the led driver configured to different GPIO pins on the ESP then and use 1 esp to run more pixels.
Mick
MartinMueller2003 wrote:Why did the ESPixelStick cross the road?
To get to the other hot spot.
Code wrote:Interested, Do you post to the Uk.?
I'm interested in the best way to get them to the UK also. Wondering if a combined UK order and then redistribution might be more cost effective.
Code wrote:Interested, Do you post to the Uk.?
RichD wrote:I'm interested in the best way to get them to the UK also. Wondering if a combined UK order and then redistribution might be more cost effective.
I shipped a few there in the last GB and they were all $13.50 via First Class International at that time, anywhere from 2 to 10 kits in each order.
In regards to the upcoming buy, I'm just waiting on feedback from the board house to verify pricing before I start it. Could take a while with the Chinese New Year going on.
thanks,
-shelby
Thanks for the update on the GB.
Yeah, no kidding. Unless you have an order in process, no one is getting anything from China for the next month !
sporadic wrote:I shipped a few there in the last GB and they were all $13.50 via First Class International at that time, anywhere from 2 to 10 kits in each order.In regards to the upcoming buy, I'm just waiting on feedback from the board house to verify pricing before I start it. Could take a while with the Chinese New Year going on.
thanks,
-shelby
