Thanks. I think it was my own idea but was probably inspired by something on here! I was originally planning to run 100 pixel strings horizontally and...
There were added using After Effects afterwards. I sequenced them in xLights as 12 individual lights then I recorded clips of each light after I'd rec...
To round this off I've just received replacement C9 pixels from Ray and they look much better, clearly epoxy filled, seem sturdier and the lenses are ...
The hedge is 12 x 96 and about 1m x 7.3m (3'4" x 24') so it is 3" spacing across and just over going down - using 18awg, 10cm/4" wired square pixels. ...
I had heard about issues in the past but assumed he wouldn't be selling any with known problems. I have just heard back from him and I'm hoping he wil...
I did sent him a message on the order when the first issues cropped up on Monday and added an update of the additional problems before posting on here...
Glad you're sorted. For brightness if you go to the layout tab in xlights you can select a model then choose dimming curves in it's properties and red...
T.D.Sutton wrote:Say if the tree is set to be Red, the last 55 Pixels display as Blue, if the tree is Green, the last 55 are Red, and if Blue the last...
I've just set up the same settings here to be sure and it works ok. When outputting from xlights open the espixelstick web page and go to Testing then...
I'm pretty sure the coloured discs still act as a lens. They only have to bend the light a little to mike quite a difference to the spot size at dista...
The E1.31 priority is already easily accessible in the code (e131.packet->priority) so that would probably be easier to use than multiple universes. T...
I'd spotted that order on the site and thought it must be someone who knew what they were doing (I'm a newbie so have learnt a bit from seeing what ot...
There appear to be two types of cover offered on epoxy filled technicolor pixels from Ray Wu. One has a cover with a separate collar and there other s...
