not sure if this was the right thread or not to post for help. I am trying to use the flash tool with the Wifi controller I got from renard. Not even sure if I can use the flash tool or not but I get this error.
Oh and I already have added one firmware to it via arduino but I'd like to update it. I think it's 1.5 but can't remember for certain. Anyways, here's the error from the flash tool
-= Building SPIFFS Image =-
bin/win/mkspiffs.exe -c spiffs/ -p 256 -b 4096 -s 131072 firmware/spiffs.bin
/config.json
/www/admin.html.gz
/www/config_net.html.gz
/www/config_pixel.html.gz
/www/config_serial.html.gz
/www/pixel.html.gz
/www/script.js.gz
/www/serial.html.gz
/www/status_e131.html.gz
/www/status_net.html.gz
/www/style.css.gz
-= Programming ESP8266 =-
bin/win/esptool.exe -cd none -cb 115200 -cp COM3 -ca 0x000000 -cf firmware/pixel-2.0-1m_128k.bin -ca 0xDB000 -cf firmware/spiffs.bin
Uploading 315392 bytes from firmware/pixel-2.0-1m_128k.bin to flash at 0x00000000
warning: espcomm_send_command: didn't receive command response
warning: espcomm_send_command(FLASH_DOWNLOAD_BEGIN) failed
error: espcomm_upload_mem failed
PROGRAMMING FAILED
madsci1016 wrote:680 pixels @ 25ms is a limit defined by the ws2811 protocol itself, you can't push out more pixels than that number/rate no matter what controller happens to be.
Was just wondering if you could run two instances of the pixel driver, but the second configured to use uart0 (I looked at the code and this seems to be currently configured for a renard controller)
If that's possible then you could run two separate outputs each with 4 universes each unless there are other constraints such as memory / processing speed?
(sorry about this being a double post, as posts were awaiting moderation)
Mick
sporadic wrote:In regards to the upcoming buy, I'm just waiting on feedback from the board house to verify pricing before I start it. Could take a while with the Chinese New Year going on.
thanks,
-shelby
Is there a way to get on a notification list for the next GB? What is the best way to follow/monitor progress?
Subscribe to this thread. You will get notifications of all replies to this topic.
If the GB is announced you will get a notification,that is unless sporadic makes a separate topic.
Kev7274 wrote:Subscribe to this thread. You will get notifications of all replies to this topic.
If the GB is announced you will get a notification,that is unless sporadic makes a separate topic.
I guess that was my question. Will it be posted here or elsewhere? I will subscribe to here.
I'm going to say he will let everybody know when the next GB will start here. I would also subscribe to the "Group Buy" thread just to be sure.
The 2017 Group Buy is now open, check the first post of this thread for details - http://doityourselfchristmas.com/forums/showthread.php?43773-ESPixelStick-V2-Group-Buy-E1-31-WiFi-Pixel-Controller-kit .
thanks!
-shelby
Sweet, been waiting for more of these, they're fantastic. I put one in each of my arches so all I need to do is provide power and I can put them wherever I want. This year I'll use them for my house pixels and move my E682 to another mega tree.
looks like I dont meet the rules for the Group buy 🙁
You have to be a supporting member on this site. Go over to the Green site and you can participate.
