I have not been a member long enough i appears to be able to participate in the GB. If anyone is in the Colorado area and has been, I'd be interested if you want to go in together?
bshaver wrote:I have not been a member long enough i appears to be able to participate in the GB. If anyone is in the Colorado area and has been, I'd be interested if you want to go in together?
There's no minimum time of being a member to participate in a group buy. You just need to be a supporting member (I think it's ~$20 for the year)
gocats7 wrote:I guess I was confused then. I thought the espixelstick supported 1 universe in multicast but 4 in unicast (I know I read this somewhere)? I have seen posts regarding 720 pixels being supported and I assumed that was unicast due to the number. I have several e682s for my pixels and it supports 7 multicast or 12 unicast.Mainly, just curious what those that have waded into wireless have experienced as its always a trade off to use and the multicast versus unicast is yet another wrinkle. Wondering what others have seen so I can factor that into my decision for how to handle next year. I read your detailed post and it makes perfect sense....but I dont want to waste that much capacity on my e682s unless it is worth it. However, the point of all of this is for peoples enjoyment and visual impact. Jerky, laggy pixels defeats the purpose! I'm in process of planning next year and which direction I go changes quite a bit in the background regarding hardware. I am looking to add a ubiquity AP solely for the SSID I use for my christmas VLAN but if using unicast that doesnt solve it all as the device still has to be close enough to reliably send back the ack.
I evidentially have a short term memory today. The ESPixelstick used to only do one in multicast, (in most cases, it did do more in some cases) but Shelby posted firmware in December that lifted that limitation.
You shouldn't plan your investment based on unicast or multicast. It will often bite you in the end. Plan based on the lowest spec and anything you get beyond that is a bonus.
Sent from my iPhone using Tapatalk Pro
Aurbo99 wrote:ThinkAgainAgain, where did you get the fused power hub from?
They are the Harrison distribution boards and they work great. I think falcon has some that are similar. Harrison's are on pre-sale right now at CFOL... https://www.crockettfantasyoflights.com/product/pre-sale-harrison-power-distro-board-rev-b/
Sent from my iPhone using Tapatalk
So I was thinking about maybe getting more of these. Though I have some questions to those who made the code for the web access. I was wondering how hard would it be to add a test feature. I'm trying to figure out how to use these for home accent lighting if at all possible. 🙂
Thanks,
Curtis
Gnatman wrote:So I was thinking about maybe getting more of these. Though I have some questions to those who made the code for the web access. I was wondering how hard would it be to add a test feature. I'm trying to figure out how to use these for home accent lighting if at all possible. 🙂Thanks,
Curtis
I used other E1.31 controllers with FPP for our kitchen under cabinet lighting and backyard pathway lighting before I picked up my ESPixelSticks, but the ESPixelSticks would work just as well w/o adding any additional features. Depending on the need, I use FPP's test mode, start effects or play regular playlists.
Here are some videos of them both in action
The backyard pathway lighting (running an effect)
list: PLyj7nkJIXBmH4JBf0AR5zBUGx7ocRsDnw
The kitchen under cabinet lighting running in test mode using the color picker (this is now integrated into FPP 1.8+)
list: PLyj7nkJIXBmH4JBf0AR5zBUGx7ocRsDnw
The kitechn under cabinet lights running a playlist
list: PLyj7nkJIXBmH4JBf0AR5zBUGx7ocRsDnw
After completing the integration with our home automation system (MisterHouse) and our Amazon Echos. The under cabinet lighting and indoor trees are being driven from FPP. Off-camera is another tree upstairs that is using an ESPixelStick that is being driven from the same FPP instance as the downstairs tree.
list: PLyj7nkJIXBmH4JBf0AR5zBUGx7ocRsDnw
Setarcos wrote:I used other E1.31 controllers with FPP for our kitchen under cabinet lighting and backyard pathway lighting before I picked up my ESPixelSticks, but the ESPixelSticks would work just as well w/o adding any additional features. Depending on the need, I use FPP's test mode, start effects or play regular playlists.Here are some videos of them both in action
The backyard pathway lighting (running an effect)
list: PLyj7nkJIXBmH4JBf0AR5zBUGx7ocRsDnw
The kitchen under cabinet lighting running in test mode using the color picker (this is now integrated into FPP 1.8+)list: PLyj7nkJIXBmH4JBf0AR5zBUGx7ocRsDnw
The kitechn under cabinet lights running a playlistlist: PLyj7nkJIXBmH4JBf0AR5zBUGx7ocRsDnw
After completing the integration with our home automation system (MisterHouse) and our Amazon Echos. The under cabinet lighting and indoor trees are being driven from FPP. Off-camera is another tree upstairs that is using an ESPixelStick that is being driven from the same FPP instance as the downstairs tree.list: PLyj7nkJIXBmH4JBf0AR5zBUGx7ocRsDnw
Thanks, I thought about just using the test feature in fpp but I'd like to not use that but I wonder if there is something else I can use to send the data to it.
The dev version of the firmware has a test mode and color picker 🙂

ESPixelStick Color Picker by smerrick, on Flickr

ESPixelStick Color Picker by smerrick, on Flickr
sporadic wrote:The dev version of the firmware has a test mode and color picker 🙂
ESPixelStick Color Picker by smerrick, on Flickr
ESPixelStick Color Picker by smerrick, on Flickr
sweet, is that on 2.1? where can I find these dev files to upload using the flashtool.
Gnatman wrote:sweet, is that on 2.1? where can I find these dev files to upload using the flashtool.
The attached zip has EFU files that are dev versions of 2.1 compiled back in December (what I ran my show on). You have to be on 2.0 already and just upload the pixel EFU file via the web interface. The UI has some bugs, some of which have been fixed already. For the latest, you'll need to build from source. I'll release a flashtool version and EFU files for OTA updating once 2.1 is done.
