ESPixelStick Flash ...
 
Notifications
Clear all

ESPixelStick Flash Tool

223 Posts
49 Users
0 Reactions
100.2 K Views
michaelc
Posts: 1540
(@michaelc)
Noble Member
Joined: 19 years ago

The enhancement I'd like to see is the ability to set the IP address from the screen. Right now I am hard coding it in the config.json after every board upload. I also have to quit the tool and come back in each time so it picks up the new config.


Reply
michaelc
Posts: 1540
(@michaelc)
Noble Member
Joined: 19 years ago

One other thing. How does the OTA work? After uploading to the units, I click on the Build EFU. What do you do with that file?


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
michaelc wrote:A thing of beauty is a joy forever!

Sent from my bat phone using Tapatalk

Nice!!! :thup:


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
michaelc wrote:The enhancement I'd like to see is the ability to set the IP address from the screen. Right now I am hard coding it in the config.json after every board upload. I also have to quit the tool and come back in each time so it picks up the new config.

Yeah, I plan on adding static config to the flash tool in the future in an advanced tab along with some other options. I wanted to keep it simple as possible.

michaelc wrote:One other thing. How does the OTA work? After uploading to the units, I click on the Build EFU. What do you do with that file?

You don't need to build them, they're already included in the firmware release (the two .efu files in the root directory). I needed a tool to build the EFU files so I just added it to the flash tool. If you compile your own custom firmware, you can use Build EFU to generate an .efu file to upload. To update or switch between serial and pixel firmware, you just upload the appropiate .efu file via the admin interface.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
sporadic wrote:Give this a spin and see if it works for you. Just upload the .efu file via the admin page.

Works Great. Easy fix/addition. and an expedited answer....you keep amazing me!


Reply
Page 7 / 45
Share: