techs21
@techs21
Trusted Member
Joined: Dec 17, 2010
Topics: 14 / Replies: 50
Reply
RE: Sandevice E682 Power Problem

so if I put some pressure on the top right corner it starts to work fine I have tried to resolder those points with no luck

8 years ago
Reply
RE: Sandevice E682 Power Problem

ok hopefully he answers maybe I will put in a ticket as well and see what he tells me as well I will post what he tells me once I get a response

8 years ago
Reply
RE: Sandevice E682 Power Problem

ok this video is all what the lights are doing even if I push the prog button I had to zip it to attach it

8 years ago
Reply
RE: Sandevice E682 Power Problem

I just tried that and both LEDs just blink together I should only have 2 jumpers one for the power and the other for the eprom right Do I need to h...

8 years ago
Reply
RE: Sandevice E682 Power Problem

these are what the lights are doing I attached a video

8 years ago
Reply
RE: Sandevice E682 Power Problem

no it doesn't show me it at all and I can login to a different networking device and see everything that is connected and it is not on there at all

8 years ago
Reply
RE: Sandevice E682 Power Problem

My computer and controller are both connected to a switch and I have tried different Ethernet cables and ports as well

8 years ago
Reply
RE: Sandevice E682 Power Problem

I am connected Ethernet and I have an IP in the same subnet

8 years ago
Reply
RE: Sandevice E682 Power Problem

Yes and it would not connect Also sorry for all the dumb questions this is the first time I am doing this

8 years ago
Reply
RE: Sandevice E682 Power Problem

my default internet is 192.168.1.X How to I override it

8 years ago
Reply
RE: Sandevice E682 Power Problem

there is nothing hooked up as of now and I have tried to go to the webpage and can not

8 years ago
Reply
RE: Sandevice E682 Power Problem

yes and I get both leds on the Ethernet port the green one flashes

8 years ago
Reply
RE: Sandevice E682 Power Problem

Ok it was the D1 diode that did it, so now I can get it to power up but the red and green LED flash 19 times and stop and then flash 19 times again an...

8 years ago
Reply
RE: Sandevice E682 Power Problem

Can I remove that diode and test to see if that is what causing the problem or do I need to replace it in order to test

8 years ago
Reply
RE: Sandevice E682 Power Problem

i fixed the soldering points When I finished soldering it and I tested it all worked for about 10 mins then it started blowing fuses and I cant get ...

8 years ago
Page 3 / 5