Activity
 
Notifications
Clear all
techs21
@techs21
Trusted Member
Joined: Dec 17, 2010
Topics: 14 / Replies: 50
Reply
RE: Help With 2nd E682

Here is the picture and I am not sure what HR is sorry I am new to this

5 years ago
Reply
RE: Help With 2nd E682

No it will not ping either

5 years ago
Reply
RE: Help With 2nd E682

Yes the both have an IP address of 192.168.1.206 but only the new controller is plugged into the network

5 years ago
Reply
RE: Help With 2nd E682

Ok so what could I be doing wrong on this one if I plug in my other one it comes up fine with the default address but if I unplug that one and try to ...

5 years ago
Topic
Replies: 20
Views: 3637
Topic
5 years ago
Replies: 2
Views: 1608
Reply
RE: Help With E682

Ok thank you guys for the help. More only other question is there a place that I can download simple sequences for vixen to understand how I would ne...

5 years ago
Reply
RE: Help With E682

Ok so know can you guys help me with getting Vixen setup for all 16 LED strips this is how I have it setup now but only 1 set of LEDs work work

5 years ago
Reply
RE: Help With E682

Ok is this the right way to set it up

5 years ago
Reply
RE: Help With E682

sorry about that uploaded the wrong picture somehow I am looking to be able to run 50 pixels per strains to start with so I am looking for help to g...

5 years ago
Topic
5 years ago
Replies: 11
Views: 2456
Reply
RE: Sandevice E682 Power Problem

ok I resolder everything around that area and now I have it working Thanks for all your help Can i ask what controller is good for normal Christmas...

8 years ago
Reply
Reply
RE: Sandevice E682 Power Problem

it only works when I put pressure on that upper corner not sure what else it could be I am trying to troubleshoot it to see if I can find out

8 years ago
Reply
RE: Sandevice E682 Power Problem

he told me the same but if I put preasure on the right side of the CPU it works fine have a look at the video at the following link

8 years ago
Page 2 / 5
Share: