Help With 2nd E682
 
Notifications
Clear all

Help With 2nd E682

21 Posts
6 Users
0 Reactions
3,627 Views
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago
[#54601]

Hey Guys I have just finished assembling my 2nd E682 I am getting all the leds and the lights on my ethernet port all lighting up I have checked the IP address on the controller but I am not able to reach the webpage. Also my green LED is flashing really fast I have included a video of this not sure if it is normal or not. I had to zip the video


20 Replies
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

Ok so what could I be doing wrong on this one if I plug in my other one it comes up fine with the default address but if I unplug that one and try to plug in this one I can not get the webpage


Reply
Posts: 54
(@microproce)
Trusted Member
Joined: 16 years ago

Did you change the ip address of your first card or is it still in .1.206?

techs21 wrote:Ok so what could I be doing wrong on this one if I plug in my other one it comes up fine with the default address but if I unplug that one and try to plug in this one I can not get the webpage

Reply
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

Yes the both have an IP address of 192.168.1.206 but only the new controller is plugged into the network


Reply
Posts: 54
(@microproce)
Trusted Member
Joined: 16 years ago

When you plug the new controller, you can ping it ?

techs21 wrote:Yes the both have an IP address of 192.168.1.206 but only the new controller is plugged into the network

Reply
Page 1 / 5
Share: