Sandevice E682 Powe...
 
Notifications
Clear all

Sandevice E682 Power Problem

70 Posts
8 Users
0 Reactions
13.2 K Views
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

as far as I know you only need the one that shows 5v and the one on eprom


Reply
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

ok this video is all what the lights are doing even if I push the prog button

I had to zip it to attach it


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

I put a ticket into Jim at sandevice asking about your problem lets see if he answers might take some time has to be something I have no idea about no info I found tells me anything about the 2 leds flashing like this


Reply
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

ok hopefully he answers maybe I will put in a ticket as well and see what he tells me as well

I will post what he tells me once I get a response


Reply
joeytx
Posts: 249
(@joeytx)
Reputable Member
Joined: 19 years ago

Can you check the voltage on pin 23 of the Propeller chip, it should be 3.3v if the program button id not engaged? I'm wondering if you have a bad push button switch.


Reply
Page 11 / 14
Share: