Pixels, channels, e...
 
Notifications
Clear all

Pixels, channels, elements

13 Posts
8 Users
0 Reactions
6,595 Views
Posts: 9
Topic starter
(@queenidog)
Active Member
Joined: 8 years ago
[#50312]

I'm getting confused with some of the terminology because some people are using terms interchangeably.

Example:I have 10 RGB LEDs (therefore 30 "pixels" in my mind).

In this example:
How many channels?
How many pixels? (is it 30?)
How many LEDS (Is it 10 or is it 30? Some are calling an RGB LED a pixel)
How many elements?

Is a pixel element the same as a pixel?
Is an RGB pixel the same as a pixel element?

How many controller outputs (generic serial) would I need? I think 30...


12 Replies
Ed Slonka Jr
Posts: 96
(@ed-slonka-jr)
Estimable Member
Joined: 19 years ago
pixel

These are PIXELS.

They contain 3 LEDs - 1 red, 1 green, 1 blue which = RGB

So each pixel is 3 channels (for a lack of a better term) because each LED can be controlled individually.

A universe is 170 pixels or 510 channels.

Depending on the controller you use will determine the amount of pixels it can control
and it depends on if you use power injection or not also.

An element is usually a decoration like a pixel snow flake or a mega tree can be an element.

Hope that helps.

Ed


Reply
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago
queenidog wrote:I'm getting confused with some of the terminology because some people are using terms interchangeably.

Example:I have 10 RGB LEDs (therefore 30 "pixels" in my mind).

In this example:
How many channels?
How many pixels? (is it 30?)
How many LEDS (Is it 10 or is it 30? Some are calling an RGB LED a pixel)
How many elements?

Is a pixel element the same as a pixel?
Is an RGB pixel the same as a pixel element?

How many controller outputs (generic serial) would I need? I think 30...

Hi, good questions. If I can start by offering you an explanation of the terms and then try to answer your question.

A channel – this is the same as a light switch in your home. It controls a single circuit, this circuit may have one or many lights attached but they all act as one. A dimmer can be added to this circuit but again all lights will dim as one (to the same levels).

A universe – this is a group of channels. The best analogy I can think of as I type this is – You live in a town with 35,000 houses but your address isn’t House number 27,649 some town, some state, USA. To make life easier the town is broken into streets, so you live at 157 some street, some town etc. With lighting we do the same, universes are a bit like streets it breaks things down into groups that are easier to manage.

A pixel – sometimes called a node. This generally refers to a single point of light or colour.

Single colour pixels – these can only display one colour. An example would be a string of white LED lights from your local store.

Dumb pixels – these have a combination of red, blue and green LED’s. They can with the appropriate controller display thousands if not millions of different colours, but they all display the same colour.

Pixels (commonly referred to as) – like the dumb pixels these contain combination of red, blue and green LED’s. The difference is that each pixel can be set to its own colour independent of all others.

To your questions.
With reference to above if these are ‘pixels’:
How many channels?
30
How many pixels? (is it 30?)
10
How many LEDS (Is it 10 or is it 30? Some are calling an RGB LED a pixel)
10x one pixel that contains three LED’s – red, green and blue.
How many elements?
Difficult to answer – I didn’t include elements in the terms above as it is a bit of a subjective term. My interpretation of an element is the group of pixels that create a display item. For a star or mini tree this could be 200 pixels, for a mega tree 1,000 to 10,000 pixels and a matrix 100,000 would not be exceptional.
Is a pixel element the same as a pixel? Is an RGB pixel the same as a pixel element?
Hopefully answered above.

How many controller outputs (generic serial) would I need? I think 30...
Yes.


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Elements are a logical grouping of one or more "things". The things can be pixels or strings or an arch or a tree. Let's use an example

I have an element implemented as a group called snowflakes. in that element I have ten groups for the individual snowflakes. each of those groups is also an element. each snowflake has five groups for the arms. each of the arm groups is an element. each arm group has 15 pixels. each pixel is a group of three channels and is an element.

How can this be? An element in vixen is something to which you can apply an effect. I can apply an effect to any and all of the above "things". This is why you sometimes see element used interchangeably. It is interchangable.


Reply
Posts: 9
Topic starter
(@queenidog)
Active Member
Joined: 8 years ago

Okay, I understand but it doesn't make sense... To me, a pixel is the smallest ELEMENT in a display, ie ONE LIGHT, just like a pixel is the smallest thing on my computer screen. A pixel is not (to me) a combo of 3 "things". An element, like in chemistry is also the smallest thing (well okay, atoms, protons, quarks are smaller) , so it can be one pixel, or one stepper or one servo. I'm okay with "universe" being a collection of elements, like a serial addressable LED string is a "universe". I would prefer the term "device" which is just "a thing" that can consist of one element or many elements. I like the way Vixen allows user to define a serial string as "elements can be any color, they are full RGB". There's no ambiguity there.
Thanks for replying, all of you.


Reply
Page 1 / 3
Share: