Hi Richie, some similar stuff in this post which may be of interest. Long time no speek, how are things?
Hi, merry Christmas, whishing all health and happyness for upcomming year.
Hi, when running the ESP on 5V and only using outputs (no input voltages on GPIO’s) I use a pair of silicon diodes between the ESP and circuit 5V and ...
Hi, I tend to vent all enclosures that contain anything that generates heat as this causes the air to expand and contract. If the enclosure cant breat...
Hi Richie, hope this finds you well. I’ve got a couple of Chauvet Q-spot 150 LED moving heads (20W I think) that I’m not using and should part with to...
Hi, the timing is spot on a credit to the hours you’ve spent on this. I’m sure the locals enjoyed this, I did on the video.
Hi, I made a little board to switch one channel of AC (no dimming) from 3 channels of WS281x data. I used it for 240V AC LED floods when used as strob...
Hi, to be most efficient and keep joints to a minimum. If 20 works and 21 doesn’t, cut the string between 20 and 21, then attach 21 to your data. If 2...
Hi, I used to enjoy the chat room – sometimes with people whilst working on projects as I surmised hiding away in their little workshop, other occasio...
Hi, this made me chuckle. Reply posted at 22:22:22 22/2/22 (UK) in support is that two much?
Hi, I think the question has been answered in the previous posts. This poses another question (if you don’t mind me asking) how are you intending to u...
Hi, first confession is that I’m all 5V. Secondly I’m nearly all TLS3001 pixels so this may not be relevant to most shows. The general principal of e...
Hi, I’m UK so shipping is a little easier. I have picked up some Raspberry Pi’s – 1’s & 2’s, these run great as controllers, only 2 outputs per Pi but...
Hi, for me it was easier to have a standalone WS2811 triac module that could be fitted anywhere in a WS2811 data stream.
Hi Phil (P. Short), my design dates back to 2017 and was built from parts I had on my bench to if I’m honest prove a point to someone who said that th...
