I'd recommend a sleeve in the ground. No dead grass under the base or portable hole. Old tree New tree
I havent used LOR or Superstar in many years.. Superstar is intended for a pixeltree or matrix. Last time I used was 6-7 years ago to create a SUP ...
I have a relatively large bush with pixels. I just used Boscoyo strip and lots of zipties.
I can't vouch for current quality of product but 100% of my display is from ScottLED. All were purchased 2015-2019, 12v resistor. About 50k in the d...
puppycrack wrote:I'd recommend the AusChristmasLighting 101 manual as a good first read to gain an initial understanding of things. Just create an ac...
I would go check out some local displays. Now is the time to interact with fellow local lighting enthusiasts and ask questions/look at displays. If ...
This doesn't surprise me. I also don't approve of what are supposed to private emails on a public forum. David Moore did the same to me, so I guess ...
I prefer the larger psus and 12v myself. 12v is much easier to distribute for me and I try to keep AC out of the front yard as much as possible. I ha...
Did you check sequence? First place I start when I have issues. Don't stress, something simple.. Worst case scenario you hop in Zoom and they get you...
Never had an issue with Boscoyo strip or any product from them. Been using it on my Mega Tree for close to 10 years now with no issues. Bought a cou...
I have tons of these. Single line or polyline is what I use. Each module will only show as a single light in layout. Forget the fact that they have...
What's holding the PVC base down? Agree on a round base as well. I use bungee balls on mine. The base ring is steel and securely held down to the g...
If you have unused ports on the controller you can use them for power injection as well. Just connect the V+ and V- to the port on controller. It so...
If not connected to wifi FPP won't know what time it is to start the playlist. Mine all stay powered up 24/7 connected to wifi while the show is runn...
