Mega Tree base idea...
 
Notifications
Clear all

Mega Tree base ideas requested

6 Posts
6 Users
0 Reactions
3,423 Views
Aurbo99
Posts: 2803
Topic starter
(@aurbo99)
Famed Member
Joined: 19 years ago
[#57031]

Hi folks

Slowly upgrading my mega tree, just wondering what others use for a base.

I currently have 2 layers of 1x6 pine board cut into 32 angled and overlapped sections to form my 10 diameter base.

Having upgraded my main pole, I may as well consider upgrading the 14 year old base


5 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

I use 3 - 10' sections of 1" EMT, bent in to a circle. Anchored with spiral dog tie down stakes from Home Depot.


Reply
TomL8345
Posts: 1356
(@toml8345)
Noble Member
Joined: 15 years ago

I use 2 10' sections of grey 1/2" PVC Conduit to form a 6' circle for the bottom of my 10' Megatree. It is anchored every 90 degrees.


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

Since our trees do not touch the ground, we use a 3/4" EMT, properly bent into a partial circle and connected to the center-pole. The circle is then held to the ground by stakes and short cables.

Note that a friend paints a circle out from his center-pole (Munkhouse Portable Hole), then he takes each of his strips to the ground and spikes each strip down. His tree is quite sturdy as I've witnessed it stand in some pretty hefty winds.

We both use a pair of cables from the back of the tree topper to the ground for balance.


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

I'd recommend a sleeve in the ground. No dead grass under the base or portable hole. Old tree ?dl=0 New tree ?dl=0


Reply
Page 1 / 2
Share: