Decrease Number of ...
 
Notifications
Clear all

Decrease Number of Power Supplies

23 Posts
12 Users
0 Reactions
7,913 Views
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

I prefer the larger psus and 12v myself. 12v is much easier to distribute for me and I try to keep AC out of the front yard as much as possible. I have 6 Meanwell RSP3000-12 spread out across the display with another 30 or so RSP320's in less dense areas. I've got close to 7k pixels on one of the RSP3000-12's @30% intensity and it isn't even breaking a sweat. I too would recommend a DC clamp ammeter. Be careful when buying one because most are only AC


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago
1pet2_9 wrote:It doesn't have to be that exact ammeter. The point is that these meters exist which you just plug in. The problem with the math is it's frequently wrong math. The meter tells you as it is. And you have the power supplies already, so why guess if you don't have to?

Math can always be checked by others, and definitely helps in not avoiding under- or over-provisioning.


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago
P. Short wrote:Math can always be checked by others, and definitely helps in not avoiding under- or over-provisioning.

I'm on the fence whether it's a worthwhile discussion, but it's like if you're trying to cut a piece of wood to the same length as another. Why tape measure it when you can just lay it down side-by-side and draw a pencil mark? Math has its place, but no need to calculate the current of 12 power supplies with P=VI when it's Christmas and you've literally got 12 power supplies running pixels sitting right there.


Reply
xGROMx
Posts: 132
(@xgromx)
Estimable Member
Joined: 13 years ago

I'm still amazed at how many people don't use server power supplies, I made the switch and never looked back. I've had so many problems with the MW 30A supplies. Look into the HP1200w supplies you can get on ebay, you can power alot with one of those and not have to worry about power supply separation.

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1311&_nkw=hp+1200w+power+supply&_sacat=0


Reply
Mghaff007
Posts: 21
(@mghaff007)
Eminent Member
Joined: 6 years ago

LOL xGROMx 7 of our power supply's are not server but computer ATX power supplies! Reason we use the ATX is the protection they offer is amazing! If there is a short even a pixel shorts out the PS will not turn on, and if you over draw on them they will shut down. Our mega tree last year had shut down due to to much current draw, it was the first time that had happened and it was a pure programming issue IE our fault but regardless it protected our tree from other issues that could have came from that simple error. We run all 5 volt lights now because of that also one of the strings last year had a shorted pixel and the PS wouldn't turn on. I replaced the PS three times before putting the ohm meter on the strip, but we feel that might have saved us from a mishap as the light that had shorted was on our structure. Anything attached to the house is ran off an ATX power supply for that reason now! We also have been purchasing 7-40v DC to 5v DC 350 watt converters so that we might be able to use something like the HP1200 or go even 36 volt out in the yard for the yard props. We like having the power supplies on the props as of now because of the safty, all the AC in the yard is on GFCI's.


Reply
Page 4 / 5
Share: