Mega Tree Connectin...
 
Notifications
Clear all

Mega Tree Connecting Strands to base

8 Posts
7 Users
0 Reactions
3,886 Views
Posts: 22
Topic starter
(@darthmilk)
Eminent Member
Joined: 9 years ago
[#56251]

Hello I was able to get my 20 feet mega tree up yesterday but the strands aren’t really lined up. Does anyone have any tips on how to secure the strands to the base and make them even?


7 Replies
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Turnbuckles for tension ,eyehooks attached to your base (equally spaced) and shorten the legs on the base to enable tension on each strand.

Or quick n dirty / less expensive fix , shorten the legs to create distance for tension and use bailing wire to tie
each strand to the base .


Reply
TomsLEDs
Posts: 443
(@tomsleds)
Honorable Member
Joined: 7 years ago

I use small turnbuckles as well. I mark the spacing evenly and drill holes through the conduit. Definitely measure twice before drilling the holes.


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

What's holding the PVC base down? Agree on a round base as well. I use bungee balls on mine. The base ring is steel and securely held down to the ground. If the base isn't secure its hard to keep them tight. Dropbox link since I cant seem to upload pic...


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago

I also use ball bungees, threaded through the last hole of the pixel mounting strip, wrapped around the base then connected back to itself (the ball). The tension pulls them all tight and keeps them nice and even.


Reply
Page 1 / 2
Share: