Big difference between IP67 and IP68. Sellers have always claimed bullet pixels are IP68, which I never believed in the first place
As a fair test , elevate the far end out of the water.
Removing conductivity of the output wiring .
Water is a conductor and could add issues which skew the results.
Can do - for all wire joints I use a generous amount of adhesive lined heatshrink which should be watertight. There are joins in the LED string anyway since there are 85 in each spiral, plus in some cases I have already replaced some of the pixels. I certainly don't trust the main connectors but those are not underwater in the video. I'm letting them dry out at the moment. For the pixels which show issues there aren't connections just before them, so it looks like moisture is ingressing into the back of them.
It sounds like you have the bases covered for a proper immersion test and experienced a similar result as I had with silicone/emulsion filled pixels.
The sad part is that we can do a better job ourselves of sealing pixels than the bulk of these manufacturers.
I'm thinking about ripping out the LED pixels and sticking on some of the 12V WS2811 LED 'neon' strip which is starting to appear on the market. These don't make such bold claims about their waterproofness, but TBH if the open 'ends' are sealed up well I can't see how moisture can get in. Like this:
https://www.aliexpress.com/item/1005004712612274.html
Noted that only every 3 LEDs is addressable, this is also where the strip can be cut
One issue on my spiral props is they do rely on the weight of the LED pixels to hold them in shape, if that makes sense.
I like everything about it except the power consumption for a single 5 meter strip.
