I need some help......
 
Notifications
Clear all

I need some help....PLEASE

5 Posts
3 Users
0 Reactions
2,014 Views
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
[#56383]

Hey All,

I ran the show for the first time tonight. I have several small matrices that have worked for years but this year suddenly they're displaying gibberish when I run a text scroll or throw up a gif picture.

I didn't change anything in my setup of those matrices from last year but did add a few things at the end of my universes...All the new stuff works. Some of the old stuff is what's acting up.

When I test my pixels they are correct....1 is 1....the last is the last...so I know my hardware is working properly. I use a FPP 3 to send out the data to Falcon 16V3's.

I have kept XL updated with the most recent changes. I did copy the sequences from my backup hard drive into my show directory as I had to do some housecleaning. Then I opened and saved the old sequences from last year in the new version of XL about a month ago.

My large matrix and pixel megatree are working fine after saving in the new version of XL....it's the small stuff (300 pixel range) that has gone nuts.

I took an fseq file that I ran last year and loaded it in place of the one that is displaying gibberish. The fseq file from last year plays perfectly on the malfunctioning matrices.

Can someone help me figure this out? I've got a show that's in sad shape...


4 Replies
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

Did you check sequence? First place I start when I have issues. Don't stress, something simple.. Worst case scenario you hop in Zoom and they get you squared away in no time


Reply
Posts: 128
(@sctwohig)
Estimable Member
Joined: 10 years ago

Create a simple sequence with bars effects on the matrix not working correctly. Have it scroll left to right then up to down. Looking at a simple effect might show how what's not working correctly.

Thanks,
Shawn


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
uncledan wrote:Did you check sequence? First place I start when I have issues. Don't stress, something simple.. Worst case scenario you hop in Zoom and they get you squared away in no time

It's not "A" sequence. Every sequence where there pictures, talking faces, scrolling text does it. I suspect other normal effects are also off but I haven't verified that for sure. I haven't use Zoom so not sure how to get in...


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

OK...just did some testing and found an odd thing. When I enter text to scroll if I put, say, an L in the word I see that PLUS it seems to invert/flip the bottom horizontal in the L up to the top....so the "L" looks more like a "C".....as there is a horizontal across the top of the "L"....it's as though I'm seeing an upside down or folded up from the bottom to the top....

UPDATE:

I found it.... For the past several years I've used the "Zig" feature on my Falcon F16v3's.....worked perfectly. Today I "Un-zigged" and now everything plays perfectly. I had not touched my controllers since last year so nothing in them had changed. The only other 2 variables were XL and the FPP.... Since I found through testing that my "Zig" patterns weren't "Zigging" in the correct order that eliminated XL....

So I can only guess something in the 6.xxx version of the FPP reacted differently when encountering the pre-set "Zig" on my controllers.

WHEW>....I'm relieved....can't begin to tell you HOW MUCH.... :biggrin2:

All that said...not sure why the same fseq file from last year rendered in 21 a version of XL worked when I replaced the one updated with one of the "22" versions of XL.... Might be a combination of things causing this....


Reply
Share: