Zig Zag question......
 
Notifications
Clear all

Zig Zag question....

3 Posts
1 Users
0 Reactions
1,952 Views
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
[#56393]

Hey All,

I had posted below about an issue that I thought I'd resolved and figured anyone who'd already read that thread might not see a follow up question. This one is more specific so maybe it's okay to start anyways.

So I changed the zig pattern on my Falcon F16v3's because text wouldn't show properly. I ran a test of one of the show sequences with the new settings and it worked. In the show tonight when that same sequence ran the text was fine. The very next sequence the text was once again garbled....

Both these sequences ran last year and all I did was render them in a "22.20" version of XL and didn't change a thing. My controllers and FPP were all the same as last year...no changes other than to add some new channels on the tail end in the last universe.

Why would 1 sequence scroll text fine and the next sequence have obvious zig issues? Is there any place other than the controller that this could be introduced/changed to so mess up my show?

I would appreciate someone weighing in on something that I'm missing....obviously. Otherwise I guess I'll have to pull all the sequences with talking faces out of the show....:bomb:


2 Replies
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
MikeKrebs wrote:Did you re-render all the sequences after introducing the zig zag? It doesn't really make sense as you changed that setting on the controller but it is the first thing I would try.

Hi Mike. Thanks for the thought and response.

I did more testing and reset everything back to 'zig'. As I experimented with different sequences some worked others were gibberish.

I went back and loaded a couple of sequences rendered for the 2021 season and they work perfectly. I created a new sequence in XL tonight to test right after I successfully ran the 2021 sequences and the one created tonight in Version 2022.23 is unusable they're so bad. The strange thing is they look fine in XL preview but when sent to the controllers they are all distorted...

I don't think this is a hardware issue since the 2021 sequences run perfectly. I've tried 2 different FPP's with the same results. It has to be something to do with XL. I went back and installed a 2021 version of XL but it does the same thing but I figure it's using some of the same setup info since I didn't have to re-enter all that information.

But I don't understand how my mega tree and matrix work perfectly prior to these 2 controllers....even the controller after these 2 works fine as well. I've checked and rechecked universes and start channels until I'm blue in the face and just can't find a problem.

It blows my mind that one sequence plays text perfectly and the next text message will be 'zigged' out... I say that because if I change the "zig" pattern it will work but the one that was working won't now......This is absolutely crazy....I'm about ready to go screaming into the night...


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

Yeah...I was just playing with that...my display is on an entirely different network router not hooked to my computer.....so I have to jump through hoops to find a workaround...


Reply
Share: