pakeonoahu
@pakeonoahu
Estimable Member
Joined: Jun 5, 2015
Last seen: Nov 18, 2026
Topics: 2 / Replies: 103
Reply
RE: Project to use a pixelstick type device as a FPP remote.

Modified the code to play more than one file, tested with three(3) and they are working. GPIO 04 connected to a momentary switch to ground, pressing ...

9 years ago
Forum
Reply
RE: Espixel by Bill Porter

davdue wrote:I have been thinking about changing my Tune To sign from a Lexan sign with stenciled words to a P10 matrix. Can I drive this with an ESPi...

9 years ago
Reply
RE: Project to use a pixelstick type device as a FPP remote.

Barnabybear wrote:Hi, that should be do-able. It was a sort of proof of concept and I’m not a coder so it is more than likely not the best way. Are yo...

9 years ago
Forum
Reply
RE: Project to use a pixelstick type device as a FPP remote.

Barnabybear wrote:Hi pakeonoahu. A nice find, other than that is it working for you? Hi Barnabybear, It works fine with 50ms rate on a 16x16 ma...

9 years ago
Forum
Reply
RE: Project to use a pixelstick type device as a FPP remote.

@Barnabybear, I was playing with your code and found out it didn't work with esp-12(core 2.4.0), did some researches on FastLED, I have to put "#defin...

9 years ago
Forum
Reply
RE: MOSFET question

Looks like the Vgs = 10v, so you will need a driver to turn it fully on, logic level 5v won't give you the low resistance(high current) you might need...

9 years ago
Forum
Reply
RE: 2017.39 released

saw the data dropped on fseq since .37, never use the batch rendering after that.

9 years ago
Forum
Reply
RE: ESP8266-12 ESPixel ???

it uses the UART for the pixel output, if you use other GPIO, WIFI can't function at the same time and cause the ESP to reboot(watchdog).

9 years ago
Forum
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

EE351 wrote:The modules I'm having trouble with are some new esp-01 I recently purchased. So the ESP-12 with ESP-01 firmware works fine with flashin...

9 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

EE351 wrote:Here's an update. If I manually edit the config.json file with the e1.31 parameters, the new black modules work fine, even after rebootin...

9 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

qawsed55 wrote:Hello! Sorry for pore English. I'm trying to test subj on Witty Cloud board I have tried last version from github. After flashing bo...

9 years ago
Reply
RE: ESPixelStick - E1.31 WiFi Pixel Controller

aumoenoav wrote:I tried the firmware on a NodeMCU, and it works with no issues (just cause of testing, dont have any official controllers on hand righ...

9 years ago
Reply
RE: Holiday Lighting 2017 Pre-Sale Starts Now!

Get well soon, I got my order couple days after you shipped it btw. Thanks!

10 years ago
Reply
RE: Can't access F16V2 from switch

why are you using 169.254.x.x/16 subnet? if you don't have a DHCP server and getting the self assigned address, you should use private static IP addre...

10 years ago
Reply
RE: Ray Wu purchase

I made few orders directly with him, paid with PayPal. i found a power supply's fan made noise 10 months after an order, contacted him on it, I got a...

10 years ago
Forum
Page 4 / 7