pakeonoahu
@pakeonoahu
Estimable Member
Joined: Jun 5, 2015
Last seen: Nov 18, 2026
Topics: 2 / Replies: 103
Reply
RE: Ubuntu flavor?

I complied it from source on 16.04 and works fine.

10 years ago
Forum
Reply
RE: Home Automation Questions Using Alexa (Echo Dot)

markrvp wrote:I just got an Amazon Echo Dot. It's awesome! I also got a Nest thermostat so I can integrate heat/cool with Alexa. Now I would like t...

10 years ago
Forum
Reply
RE: Ray Wu

hmmm, strange, I found one of his 5V power supply's internal fan made noise when I tilted the unit, it was purchased in Jan 2016, I made a video of i...

10 years ago
Forum
Reply
RE: DIY Pi Hat for Snowflake

rj12 wrote:So I have decided to use a Bi-Directional logic converter along with the SPI pins on the Pi2 I currently have. I do have some concerns as I...

10 years ago
Reply
RE: Wemos D1 as a controller?

rjchu wrote:Can the implementers be more specific please? Code perhaps? Thanks, -Joni- I use ESP-12 with Espixelstick code, works fine, you will n...

10 years ago
Forum
Reply
RE: Acceptable failure rate for pixels?

DanJ wrote:I bought my first nodes (3700 of 'em) this year (have used strips previously) from Ray Wu and I found about 5 or 7 or so that were bad as y...

10 years ago
Reply
RE: Trigger a video in FPP from Vixen?

You will need to trigger it with an URL, ie: pi ipaddress/fppxml.php?command=triggerEvent&id=.

10 years ago
Reply
RE: Garage Door Opener - pixel interferrance - anyone found a fix

Hmm, it's a little different from what I have experienced, when the sequences are running, my remote distance shorten a lot, need to drive all the way...

10 years ago
Forum
Reply
RE: 60/40 or 63/37 solder

I have few spools of 60/40 and 63/37, I always pickup the 63/37 since it's smoother to work with, I can tell if I have 60/40 on my hand once it hit th...

10 years ago
Reply
RE: Fm transmitter

Wolfie wrote:I don't have a projector so I don't use mp4s. Does it work when outputting to gpio ws2811? Can't output audio when using the pwm to out...

10 years ago
Reply
RE: DMX to SSR circuit?

Wolfie wrote:So, I am looking at using FPP events with set channel script(s) to turn these on/off. I want to severely curtail wifi packets for show d...

10 years ago
Forum
DMX
Reply
RE: DMX to SSR circuit?

Wolfie wrote:Oh. Gotcha. Now I understand. The panels/uno will probably have their own 5v supply. I had considered using another of the buck conve...

10 years ago
Forum
DMX
Reply
RE: DMX to SSR circuit?

Wolfie wrote:Well, no wonder. That regulator is only good for 200 to 250ma max depending on what spec sheet you read. If the esp draws 250, that's a...

10 years ago
Forum
DMX
Reply
RE: DMX to SSR circuit?

Wolfie wrote:No ESP at all and yes to the Uno. Yea, just a point toward some info here and there and I can probably figure it out. I think I will gr...

10 years ago
Forum
DMX
Reply
RE: DMX to SSR circuit?

Wolfie wrote:So, the programmer and the chip plus breakout board. Anything else? That's all you will need + 3.3v regulator to get this going, I kno...

10 years ago
Forum
DMX
Page 5 / 7