Last seen: Nov 18, 2026
Nope, don't have a serial adapter. This...? www.ebay.com/itm/121758185122 Yes, got the same chipset and works fine. Or this? This one will make y...
It will be easy for you, I used ESP-12, that cost about $3.5, I am sure you have a TTL serial adapter, if not then use your Arduino, pop the chip out ...
Wolfie wrote:I picked up a few of these from Todd: My intention is to convert the outputs to be fed to SSRs and to TTL signal inputs of Arduinos. B...
Wolfie wrote:I am unclear as to what you mean by "a number of options". The link is quite specific. Model SL917. This unit has all the functions on...
CatMan42 wrote:Just a quick update. I attempted to add an RTC to the BBB/octoscroller set-up. I know for a fact that this doesn't work.... It inter...
razataz327 wrote:Hi I finally got my mega 2560, w5100 board and an 8 relay board. Now to hook it up to vixen. Should I use vixen 2 or 3? I have see...
When I did couple of my purchases with Greg in 2015, all I got was bad experiences on both orders, did the second order was to give him another chance...
jchuchla wrote:Yeah. This is one of those things that can quickly get complex. But for reference, effects belong to layers. Layers belong to a sequenc...
Barnabybear wrote:Hi, all thanks for the comments. I'm going to try dropping the supply voltage first as thats an easier of the two for me (I don't kn...
I have opened up those cheap RF attenuator before, they are either Pi or T pad, a quick search on youtube came up with this:
you could try a T pad passive attenuator, 3 resistors and keep the legs as short as possible. , calculator , keep the impedance @ 50 ohms for RF, i...
MrSmoofy wrote:I had a TRS-80 Color Computer 2 as well was my first computer and how I taught myself to write software. Been a software developer sin...
Wolfie wrote:My first beast... Started out at 1k bytes of ram. Took me several weeks to solder together and debug. Eventually grew to 16k with a p...
MartinMueller2003 wrote:I had a TRS-80 and a VIC-20 and I worked on the Colecovision ADAM and does anyone remember the Peanut from IBM? I had a trs-...
kartingted wrote:would they work as a null pixel? without having to add a null pixel, I have a 2.5M run between pixels on 3 runs and need to boost sig...
