Also looking for help with running ESPixelStick.
[Edit] Documenting some progress:
- You need the very latest versions of the Arduino IDE and so on. "Arduino for ESP8266" v2.3.0 is NOT good enough. You do need v2.4.0rc1 ( https://github.com/esp8266/Arduino/releases/download/2.4.0-rc1/package_esp8266com_index.json ). This page seems correct: https://github.com/forkineye/ESPixelStick , Others (e.g. http://forkineye.com/wp-content/uploads/2015/11/ESPixelStick-Assembly-and-Usage.pdf ) less so... obviously things have progressed since it was written..
- You do need to install Node.js and gulp and run gulp, as per https://github.com/forkineye/ESPixelStick/blob/master/html/README.md before loading the data directory to the 8266 (below). This sets up stuff for the webserver, I think
- The config.json file (and other files in the data directory) gets from your computer to the ESP8266 by running the "ESP8266 Sketch Data Uploader" tool, which you should have installed in Arduino IDE. If you don't upload that file (after uploading the sketch itself) you'll get "null" for the ID. e.g. "Connecting to lights as null" (my highlighting; I've changed the default SSID to const char ssid[] = "lights";)
- The IP address of Access Point is 192.168.4.1, NOT the address you put in config.json. The WiFi access point is named "ESPixelStick esps-8f6c7b".
- By switching my phone to use the new WiFi AP, and browsing to 192.168.4.1, I can at least control the lights 🙂
But I really would like the ESP8266 to connect to my WLAN... any ideas please?
ESPixelStick v3.0-rc3
- Configuration loaded.
Connecting to frank as esps-8f6c7b
Connecting with DHCP..............................
Failed to connect
Timeout - Reverting to default SSID
Connecting to frank as esps-8f6c7b
Connecting with DHCP..............................
Failed to connect
* FAILED TO ASSOCIATE WITH AP, GOING SOFTAP *
- Web Server started on port 80
- Unicast port: 5568
- Listening for 510 channels, from Universe 1 to 1
I used only ESPSFlashTool, typed my ssid and password and thats all, no need to use Arduino ide.
I tried the firmware on a NodeMCU, and it works with no issues (just cause of testing, dont have any official controllers on hand right now), but is it possible to divide universes on different pinouts? (so its possible to run multiple data outputs from a controller)?
Isn't it a problem keeping the data signal from the controller to 600+ pixels with one data line?
Help. I think I killed my Espixelstick today. I accidentally crossed positive and negative. Now there is nothing. Please tell me there is some magic incantation or spell that can resurrect this little guy.
What really irritates me is that I have been so thorough with checking and double-checking all connections and this one crossed wire slipped through.
Any help is appreciated
Sent from my iPhone using Tapatalk
dt4227 wrote:Help. I think I killed my Espixelstick today. I accidentally crossed positive and negative. Now there is nothing. Please tell me there is some magic incantation or spell that can resurrect this little guy.What really irritates me is that I have been so thorough with checking and double-checking all connections and this one crossed wire slipped through.
Any help is appreciated
Sent from my iPhone using Tapatalk
Check your voltage - see pose 685: http://doityourselfchristmas.com/forums/showthread.php?39166-ESPixelStick-E1-31-WiFi-Pixel-Controller&p=469631#post469631
aumoenoav wrote:I tried the firmware on a NodeMCU, and it works with no issues (just cause of testing, dont have any official controllers on hand right now), but is it possible to divide universes on different pinouts? (so its possible to run multiple data outputs from a controller)?Isn't it a problem keeping the data signal from the controller to 600+ pixels with one data line?
I don't think using other gpio than 2 will work without it crash/rebooting, his code is using UART for bit banging. No problem driving 600+ pixels, just need to power inject, data line to first pixel as good as other pixel controllers(with a line driver).
frankv wrote:Also looking for help with running ESPixelStick.But I really would like the ESP8266 to connect to my WLAN... any ideas please?
Is your network name "frank" or "Frank" In windows it doesn't matter, in the pixelstick firmware it does matter!
Brilliant! Thank you. All working now 🙂 🙂 🙂
mrGrumpy wrote:Check your voltage - see pose 685: http://doityourselfchristmas.com/forums/showthread.php?39166-ESPixelStick-E1-31-WiFi-Pixel-Controller&p=469631#post469631
No voltage at either point
Sent from my iPhone using Tapatalk
Hello!
Sorry for pore English.
I'm trying to test subj on Witty Cloud board

I have tried last version from github. After flashing board with ESPSFlashTool.jar it connects to my Wi-Fi network, that work on my android phone.
In web interface I try test. Its work ok. When I try to setup ArtNet - there are mistakes on web interface - dropdown menus are empty (color order and other).
After reboot - ESPPxStick connecting to android acces point, but after 3-4 sec it reboots in cycle.
Serial Monitor show this exceptions:
ESPixelStick v3.0-rc3 (20170805)
- Configuration loaded.
Connecting to novorossia1 as esps-181599
Connecting with DHCP.........
Connected with IP: 192.168.43.146
- Web Server started on port 80
- Listening for 1 channels, from Universe 1 to 1
- Unicast port: 5568
Exception (29):
epc1=0x402083b4 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000
ctx: cont
sp: 3fff1150 end: 3fff15d0 offset: 01a0
>>>stack>>>
3fff12f0: 3fff01b4 3fff0244 3fff011c 4020830c
3fff1300: 00001000 2d435341 312e3145 00000037
3fff1310: 00006c72 ee110400 41b720c6 e8a04914
3fff1320: 2326a022 56726c81 02000000 65786956
3fff1330: 0033206e 00000000 00000000 00000000
3fff1340: 00000000 00000000 00000000 00000000
3fff1350: 00000000 00000000 00000000 00000000
3fff1360: 00000000 00000000 00000000 ce000064
3fff1370: 72010000 00a10209 01010000 ff0000ff
3fff1380: 0000ff00 ff00ff00 ff000000 0000ff00
3fff1390: ff00ff00 ff000000 0000ff00 ff00ff00
3fff13a0: ff000000 0000ff00 ff00ff00 ff000000
3fff13b0: 0000ff00 ff00ff00 ff000000 0000ff00
3fff13c0: ff00ff00 ff000000 0000ff00 ff00ff00
3fff13d0: ff000000 0000ff00 ff00ff00 ff000000
3fff13e0: 0000ff00 ff00ff00 ff000000 0000ff00
3fff13f0: ff00ff00 ff000000 0000ff00 ff00ff00
3fff1400: ff000000 0000ff00 ff00ff00 ff000000
3fff1410: 0000ff00 ff00ff00 ff000000 0000ff00
3fff1420: ff00ff00 ff000000 0000ff00 ff00ff00
3fff1430: ff000000 0000ff00 ff00ff00 ff000000
3fff1440: 0000ff00 ff00ff00 ff000000 0000ff00
3fff1450: ff00ff00 ff000000 0000ff00 ff00ff00
3fff1460: ff000000 0000ff00 ff00ff00 ff000000
3fff1470: 0000ff00 ff00ff00 ff000000 0000ff00
3fff1480: ff00ff00 ff000000 0000ff00 ff00ff00
3fff1490: ff000000 0000ff00 ff00ff00 ff000000
3fff14a0: 0000ff00 ff00ff00 ff000000 0000ff00
3fff14b0: ff00ff00 ff000000 0000ff00 ff00ff00
3fff14c0: ff000000 0000ff00 ff00ff00 ff000000
3fff14d0: 0000ff00 ff00ff00 ff000000 0000ff00
3fff14e0: ff00ff00 ff000000 0000ff00 ff00ff00
3fff14f0: ff000000 0000ff00 ff00ff00 ff000000
3fff1500: 0000ff00 ff00ff00 ff000000 0000ff00
3fff1510: ff00ff00 ff000000 0000ff00 ff00ff00
3fff1520: ff000000 0000ff00 ff00ff00 ff000000
3fff1530: 0000ff00 ff00ff00 ff000000 0000ff00
3fff1540: ff00ff00 ff000000 0000ff00 ff00ff00
3fff1550: ff000000 0000ff00 ff00ff00 ff000000
3fff1560: 0000ff00 ff00ff00 ff000000 0000ff00
3fff1570: ff00ff00 ff000000 0000ff00 40210000
3fff1580: 00000000 00000000 feefeffe feefeffe
3fff1590: feefeffe feefeffe feefeffe feefeffe
3fff15a0: 00000000 00000000 00000001 3fff05a4
3fff15b0: 3fffdad0 00000000 3fff059d 40217888
3fff15c0: feefeffe feefeffe 3fff05b0 4010070c
<<<stack<<<
ets Jan 8 2013,rst cause:2, boot mode:(3,6)
load 0x4010f000, len 1384, room 16
tail 8
chksum 0x2d
csum 0x2d
v00000000
~ld
ESPixelStick v3.0-rc3 (20170805)
- Configuration loaded.
Connecting to novorossia1 as esps-181599
Connecting with DHCP.......
Connected with IP: 192.168.43.146
- Web Server started on port 80
- Listening for 1 channels, from Universe 1 to 1
- Unicast port: 5568
Exception (29):
epc1=0x402083b4 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000
ctx: cont
sp: 3fff1150 end: 3fff15d0 offset: 01a0
>>>stack>>>
3fff12f0: 3fff01b4 3fff0244 3fff011c 4020830c
3fff1300: 00001000 2d435341 312e3145 00000037
3fff1310: 00006c72 ee110400 41b720c6 e8a04914
3fff1320: 2326a022 56726c81 02000000 65786956
3fff1330: 0033206e 00000000 00000000 00000000
3fff1340: 00000000 00000000 00000000 00000000
3fff1350: 00000000 00000000 00000000 00000000
3fff1360: 00000000 00000000 00000000 3d000064
3fff1370: 72010000 00a10209 01010000 00ff00ff
3fff1380: 00ff0000 000000ff 00ff00ff 00ff0000
3fff1390: 000000ff 00ff00ff 00ff0000 000000ff
3fff13a0: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff13b0: 00ff0000 000000ff 00ff00ff 00ff0000
3fff13c0: 000000ff 00ff00ff 00ff0000 000000ff
3fff13d0: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff13e0: 00ff0000 000000ff 00ff00ff 00ff0000
3fff13f0: 000000ff 00ff00ff 00ff0000 000000ff
3fff1400: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff1410: 00ff0000 000000ff 00ff00ff 00ff0000
3fff1420: 000000ff 00ff00ff 00ff0000 000000ff
3fff1430: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff1440: 00ff0000 000000ff 00ff00ff 00ff0000
3fff1450: 000000ff 00ff00ff 00ff0000 000000ff
3fff1460: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff1470: 00ff0000 000000ff 00ff00ff 00ff0000
3fff1480: 000000ff 00ff00ff 00ff0000 000000ff
3fff1490: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff14a0: 00ff0000 000000ff 00ff00ff 00ff0000
3fff14b0: 000000ff 00ff00ff 00ff0000 000000ff
3fff14c0: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff14d0: 00ff0000 000000ff 00ff00ff 00ff0000
3fff14e0: 000000ff 00ff00ff 00ff0000 000000ff
3fff14f0: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff1500: 00ff0000 000000ff 00ff00ff 00ff0000
3fff1510: 000000ff 00ff00ff 00ff0000 000000ff
3fff1520: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff1530: 00ff0000 000000ff 00ff00ff 00ff0000
3fff1540: 000000ff 00ff00ff 00ff0000 000000ff
3fff1550: 00ff00ff 00ff0000 000000ff 00ff00ff
3fff1560: 00ff0000 000000ff 00ff00ff 00ff0000
3fff1570: 000000ff 00ff00ff 00ff0000 40210000
3fff1580: 00000000 00000000 feefeffe feefeffe
3fff1590: feefeffe feefeffe feefeffe feefeffe
3fff15a0: 00000000 00000000 00000001 3fff05a4
3fff15b0: 3fffdad0 00000000 3fff059d 40217888
3fff15c0: feefeffe feefeffe 3fff05b0 4010070c
<<<stack<<<
ets Jan 8 2013,rst cause:2, boot mode:(3,6)
load 0x4010f000, len 1384, room 16
tail 8
chksum 0x2d
csum 0x2d
v00000000
~ld
Is there troubles with module? May be it is uncompatible with subj firmware?
Thanks!
