why not make your own custom AC cords to the controllers... get a spool of it and a bunch of plug ends?
maybe you didnt add the route correctly? you can change your netmask to 255.255.0.0 i think will work
MikeKrebs wrote:That is a cool feature. If you figured that out, then you know it would just as easy to play a playlist or a single sequence. Have yo...
i personally prefer 1 big sequence so i can have the songs blend into eachother. it does make it harder copying and moving already sequenced songs fro...
yeah you need a gamma correction curve/table made for pixels.. there was one posted here a few years ago i wish the search features were better on t...
also the LEDs they use can have different current requirements
you sure your power supply is not glitching? watch a voltmeter and see if it drops voltage when it resets?
thats correct.. power injecting will depend on: how many pixels you have distance from controller thickness of power/gnd wire you have to check fina...
in the pic, the leg of the capacitor is almost touching the yellow wire... it should only touch the red wire.. wrap both legs of that cap with electr...
looks like data corruption to me.. whether from wrong timing, noisy dataline or distance from controller is what you have to figure out..
someone just posted scripts for 3d camera mapping on here about a week ago.. no clue how easy it is to use/setup..
can you get better pictures showing PCBMarkings whee the wires connect to the board.. also pic of the chip thats kind of in the middle of the 2 conne...
if you are going to use 100% white you will need to power inject.. enough? for a180degree flat tree i would guess yes... except seems the vertical sp...
all PS's and controller must be grounded to eachother... Ground is also called "common" for this reason. it makes sure everything has a common volta...
i wonder if its something totally retarded like you have to hit the power button on the remote first?
