for the floods, maybe you connected to the output of the flood insted of the input? you can never be sure they put the correct connectors at the corr...
worry about getting test patterns in the 682 before you worry about vixen.. the config you listed will only output on connector 1-1 because outputsin...
people do this and there are occasionally posts about it here. some people like server power supplies i prefer standard power supplies.. easier to ge...
that will work, but you might have pink pixels in the middle of the string when you set it to 100% white. rule of thumb: 5v = 50pixels 12v = 100pixels...
you going to be able to get to the controller fast when it catches on fire? for longruns or far away runs i just double up power&gnd wires for half t...
the PSupply is not enough to power 1500 pixels at 100% white. P / V = 350 / 5 = 70Amp 70A / .06A = 1166pixels 1166 * 0.8 = 932pixels with PSup Safety...
if you dont find a sketch, set all the strings to be the same as your longest string. then correct it inside of vixen
i would guess your data wire is losing voltage... but you only have 5 feet between controller and first pixel - that should work fine... so then th...
flickering? random pixels blink real quick all over the strings? If yes i think its your signal line (distance between first pixel and controller)- c...
also the option of 510channels/universe vs 512channels per universe is a possible gotcha
you get 65535 when you have too many channels/universes remember also unicast=12universes multicast=7universes
i would either, make the matrix on top of garage door bigger or top half of house - vertical lines on outside edges of house and maybe verticals wher...
try google DNS 8.8.8.8
doubt it. the pixels either get their data or they dont. if you can turn the puxels on/off AND if you have enough power to do full white then your pro...
your concerns are valid. some pixels wont have compatible timing to be inserted into the middle of a different type. the timing on the controller onl...
