E682 flickering pix...
 
Notifications
Clear all

E682 flickering pixels

12 Posts
6 Users
0 Reactions
4,477 Views
Posts: 528
Topic starter
(@bud29)
Honorable Member
Joined: 17 years ago
[#53010]

Question for all the people smarter than me:

Reconfiguring how some of my props are connected in my show and I've moved about 260 12V 2811's onto a e682(firmware 4.33). When I run test patterns they look great, and work as expected but when I go to 0 output (ie pixels should be off) the pixels are instead flickering and fluttering all over the place. Connections look good, pixels are all good as I tested them on another controller. And the e682 is good, as it's running other pixels as well.

Any thoughts?

Rob


11 Replies
DrNeutron
Posts: 2016
(@drneutron)
Noble Member
Joined: 14 years ago

Upgrade to latest firmware 5.03.
There may an issue with the timings. Latest firmware allows you to set the timings and gives you individual control over each output.


Reply
Wildbill
Posts: 259
(@wildbill)
Reputable Member
Joined: 16 years ago

That was an issue that popped up last year when they changed the 2811 chip. You need to upgrade the firmware like he said so you can adjust the timings for the new pixels

Sent from my iPhone using Tapatalk


Reply
Posts: 528
Topic starter
(@bud29)
Honorable Member
Joined: 17 years ago

Awesome, I will give it a try. Probably should have updated the firmware a while ago, but generally I don't like messing with things if they are working ok for me.

Thanks for the help,

Rob


Reply
Posts: 241
(@mrdudeman)
Reputable Member
Joined: 12 years ago

flickering? random pixels blink real quick all over the strings?
If yes i think its your signal line (distance between first pixel and controller)- change the resistor packs to 100ohm... if still flickering you might need null pixels


Reply
Page 1 / 3
Share: