Pixel current draw ...
 
Notifications
Clear all

Pixel current draw confusion

9 Posts
6 Users
0 Reactions
2,118 Views
Posts: 113
Topic starter
(@cmndr-brain)
Estimable Member
Joined: 9 years ago
[#53261]

My setup only uses pixels. Most of them are from a popular reputable Chinese supplier. I recently needed a few more and didn't have time to wait, so I ordered some from a supplier on Amazon (Supposedly a "brand name" pixel node). First I have to say the quality seems a step up.

I have a mini tree w/ a star that has a total of 70 nodes. These nodes are from the mentioned chinese supplier and they draw 3.6 Amps.
I've tested the new Amazon supplier nodes and 100 nodes only draw 2.4 Amps. So I connected another 50 (150 total) and they draw 3.6 Amps (even with power injection).

Both are 18awg bullet nodes 10cm spacing.

Why would a 70 node string draw so much over a 100 node string of similar type?


8 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

What voltage? If 12v are they resistor or regulated?


Reply
Posts: 113
Topic starter
(@cmndr-brain)
Estimable Member
Joined: 9 years ago

Very good question. Yes 12v. How can I tell? What is better? Longevity, reliability?

Looking at the physical makeup of the pixels. The chinese brand has an extra chip. Besides the 8pin WS2811, it looks like a 3 pin chip, probably the regulator.
The Amazon supplier nodes just has the resistors and capacitors.


Reply
Posts: 120
(@superdave)
Estimable Member
Joined: 13 years ago

Regulated vs Resistor : https://www.wiredwatts.com/learn-regulators

Has a decent explanation and photos showing the difference.


Reply
Posts: 241
(@mrdudeman)
Reputable Member
Joined: 12 years ago

also the LEDs they use can have different current requirements


Reply
Page 1 / 2
Share: