aaron1 wrote:I wondered about that. My e682 is running in unicast and is driving the pixels, just as I expect it to. Would it even pick up the multi...
ronp5683 wrote:Zedboard. Last time they put a processor in an FPGA it did not sell. Zedboard $400, single price for IC, $275. Raspberry PI $35, FPGA...
I haven't been around in a long time... To make a long story short - the economy of the area I live in has resulted in me delaying the process of pur...
Materdaddy wrote:Comparing this to an Arduino is like comparing apples and oranges. A more appropriate comparison would likely be something like the ...
dirknerkle wrote: Another approach might be to create power supplies that provided clean 120vdc and power lights with that using existing PWM concept...
Arduino hardware makes a great AVR development board. I'm not a big fan of the Arduino IDE (it's pretty inefficient when you get into stuff like soft...
I like the idea of modularity - it's why I was going to start designing my own DMX-based controller (power supply + ZC module, then PWM modules using ...
n8huntsman wrote:Would a simulated sine wave inverter cause issues with the PWM or ZCS? ErnieHorning wrote:I know that some people have had issues ...
cruizer wrote:Ok, please excuse my ignorace, because it's been a couple years since I've been here, but can you control these, RGB Dimming and all wit...
2.5 seems EXTREMELY low for a white LED at normal drive currents. How much current was going through the LED when you measured it? At extremely low ...
12-bit, 3 channels, but it should be scalable up to 8+ channels without much trouble. You might need to drop to 11 bits then. Increasing bit depth i...
Seed Studio is pretty well regarded. There's also the dorkbotPDX PCB order at However in large quantities these may not be the best - they're great...
I've used the Atmel softpwm approach - works well. I've also increased its resolution using sigma-delta modulation to dither the output - this allows...
chesterspot wrote:Because I like the arduino IDE. It's easy. I'm not trying to discount your product, this a just a different means to an end. Arduin...
Interesting - it's obviously some form of powerline communication, but there is no documentation whatsoever. Might want to look into the X10 protocol...
