BlinkM Clone
 
Notifications
Clear all

BlinkM Clone

11 Posts
7 Users
0 Reactions
7,211 Views
Posts: 214
(@chesterspot)
Estimable Member
Joined: 16 years ago

The difference is that these can be standalone. I happen to like the AT uC's.

http://thingm.com/products/blinkm


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

Of course, so can that device that I mentioned.

Just out of curiosity, why do you care what μC is involved?


Reply
Posts: 214
(@chesterspot)
Estimable Member
Joined: 16 years ago

Because I like the arduino IDE. It's easy. I'm not trying to discount your product, this a just a different means to an end.


Reply
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

Might I mention that this probably could've been done much cheaper with a pixel driver, like the WS2801, which can be had for maybe $.2 in quantities of 100+ from china


Reply
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago
chesterspot wrote:Because I like the arduino IDE. It's easy. I'm not trying to discount your product, this a just a different means to an end.

Arduino IDE won't target Tinys like those required to meet a good cost point on these.

If you're interested in targeting Tinys like this with your own firmware, you might want to look at my I2C RGB project from late 2009/early 2010. I gave up on that though, as I never got the USI I2C working reliably. ThingM seems to have done so, but their firmware does not have source available so I have no idea how they fixed it.

(I could've sworn the BlinkM was on a Tiny24 or 44, not a Tinyx5 like the linked project...)

One of the other reasons I gave up is because 2801 pixels plummeted in price midway through last year...


Reply
Page 2 / 3
Share: