Results 1 to 2 of 2

Thread: Renard RHL PI ZERO PIXEL CONTROLLER KIT

  1. #1
    Join Date
    Oct 2009
    Location
    San Francisco, CA
    Posts
    42
    Post Thanks / Like

    Default Renard RHL PI ZERO PIXEL CONTROLLER KIT

    I recently purchased a Renard RHL PI ZERO PIXEL CONTROLLER KIT ( http://www.renard-shop.com/home/68-p...ontroller.html ). I got it all soldered up, and tried it out, but no blinky. I have a Falcon Pi-Hat as well, and it works just fine(meaning I put it on the same Pi-zero board I was trying the Renard on, and it works). I am setting the Renard board up just like I had the Falcon Pi Cap setup. I attached a screen shot of that. I also attached pics of my solder work(I am not an expert...could be I just did that wrong). I am using a Meanwell 12V PSU (LRS-350-12). When using the Renard Board, I am also plugging a R-Pi PSU into the R-Pi.
    Attached Images Attached Images

  2. #2
    Join Date
    Aug 2012
    Location
    Nova Scotia, Canada
    Posts
    1,849
    Post Thanks / Like

    Default Re: Renard RHL PI ZERO PIXEL CONTROLLER KIT

    I would definitely look at your soldering around the middle of the board and reflow the connections.
    solder.jpg
    Phil

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •