Results 1 to 5 of 5

Thread: Couple of problems ...

  1. #1
    Join Date
    Nov 2014
    Location
    Fox Valley Area, Wisconsin
    Posts
    202
    Post Thanks / Like

    Default Couple of problems ...

    Color Gradients ... I can add them ... cannot remove them.

    SETUP: Can ADD channels with "SHFT+CLICK" but cannot REMOVE channels with same method. Have to restart selection. I.E. Need 500, selected 501, have to restart process.
    -Eddie

    The missus wants to ride!

  2. #2
    Join Date
    Oct 2011
    Location
    Maryville, Illinois
    Posts
    1,938
    Post Thanks / Like

    Default Re: Couple of problems ...

    If you are talking about color points, in the inline effect editor hold Alt key and click on the color point you want to remove. In the full gradient editor, select it and click the delete button.

    If you are talking about adding or removing controller channel selections from a group of selected ones, CTRL click will deselect individual ones. There is not a way to deselect a block within a selection.

  3. #3
    Join Date
    Nov 2014
    Location
    Fox Valley Area, Wisconsin
    Posts
    202
    Post Thanks / Like

    Default Re: Couple of problems ...

    I am using, in this example, Spiral. Color:Gradients: I can Add a color ... but the Remove button stays dark when I select a color to remove it.
    -Eddie

    The missus wants to ride!

  4. #4
    Join Date
    Oct 2011
    Location
    Maryville, Illinois
    Posts
    1,938
    Post Thanks / Like

    Default Re: Couple of problems ...

    Quote Originally Posted by RGB_Mixer View Post
    I am using, in this example, Spiral. Color:Gradients: I can Add a color ... but the Remove button stays dark when I select a color to remove it.
    Select along the sides or the top of the gradient you want to remove and it will be highlighted in blue which shows it is selected. Then the remove button will enable.

  5. #5
    Join Date
    Nov 2014
    Location
    Fox Valley Area, Wisconsin
    Posts
    202
    Post Thanks / Like

    Default Re: Couple of problems ...

    Quote Originally Posted by jeffu231 View Post
    Select along the sides or the top of the gradient you want to remove and it will be highlighted in blue which shows it is selected. Then the remove button will enable.
    Got it

    TY Jeff
    -Eddie

    The missus wants to ride!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •