ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
Posts: 485
(@jerry-rigs)
Honorable Member
Joined: 11 years ago
DrNeutron wrote:Any update on when these may be available again???

Interested. +1


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago

Heyas everyone. Sorry, been away for a while due to work and other life stuff. I have the new boards laid out and almost ready to be sent off (silkscreen and tweaks to be done), just need to wrap up a few things at home before I can get back to working on this. Biggest change is an onboard switching converter, allowing for 5-24V input without having to deal with a configuration jumper and alternate mounting option for people who stick these in CG cases.

espixelstick2

Reply
Posts: 171
(@dmjpixel)
Estimable Member
Joined: 11 years ago

Excellent - thanks for the update!


Reply
Posts: 5
(@dylangelaan)
Active Member
Joined: 11 years ago

thanks for repleying, i still havent figured it out.. could you please tell me your esp settings and jinx settings? the link you placed is not correct.
with luminair and i vixen i experience quet a bit of deley is that because those programs are multicast ?
i saw this video

here he is driving 720 pixels on 1 esp. so how do i set this up? put al pixel data in one big line ? since you got only 1 data out on the esp. i really want to get it working proper!
Nice store and projects you got by the way!, very interesting, to bad i cant read polish..
Thanx Daan


Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
dylangelaan wrote:thanks for repleying, i still havent figured it out.. could you please tell me your esp settings and jinx settings? the link you placed is not correct.
with luminair and i vixen i experience quet a bit of deley is that because those programs are multicast ?
i saw this video

here he is driving 720 pixels on 1 esp. so how do i set this up? put al pixel data in one big line ? since you got only 1 data out on the esp. i really want to get it working proper!
Nice store and projects you got by the way!, very interesting, to bad i cant read polish..
Thanx Daan

I've had users tell me they've used it successfully with Jinx, but I'm not positive on their configuration. You shouldn't have any delay issues if everything is configured correctly. One thing to note is that your E1.31 source (vixen, jinx, etc...) must either be hardwired or connected via a seperate wireless network than your ESPixelStick. If you try to transmit E1.31 wirelessly connected to the same AP as your ESP modules, you'll get all sorts of lag due to the simplex nature of 802.11. In the video you referenced, I was using 1 ESPixelStick with all the nodes connected to one output. It was configured as unicast, with FPP playing the sequence.
-shelby


Reply
Posts: 93
(@mattpenner)
Estimable Member
Joined: 14 years ago

Very exciting! Can't wait for the group buy. 😉


Reply
Posts: 35
(@dvjcodec)
Trusted Member
Joined: 11 years ago

I just made short tutorial how to set-up Jinx! with ESPixel stick. Please visit my G+

https://plus.google.com/+dvjcodec/posts/AkwKRNdnSKW

Any questions - feel free

---
Kris


Reply
Posts: 654
(@szaske)
Noble Member
Joined: 14 years ago

Can someone explain the typical power setup? This looks like a cool little gadget, but I'm wondering how you power the lights. Do you have a 5v power supply in a box nearby? What does a final elegant solution look like? -=Steve


Reply
Akentut
Posts: 235
(@akentut)
Reputable Member
Joined: 14 years ago
szaske wrote:Can someone explain the typical power setup? This looks like a cool little gadget, but I'm wondering how you power the lights. Do you have a 5v power supply in a box nearby? What does a final elegant solution look like? -=Steve

Steve, I have 5 of these currently inside a 10W RGB Floodlight. I rebuilt the rear housing and put the ESPixelstick in along with a 12v AC/DC converter. Since my landscape is run via a 12vac 300w power system, I just changed out the original 110AC to 12VDC inside the floods and replace with the 12v AC/DC which powers the ESPixelstick. Then wired it to the LED driver board.

I'll also be using these inside a 1 1/2" HDPE tube for arches, placing a 110vac to 5vdc power module and the ESPixelstick inside the tube with a ws2811 strip. Plug the arch into 110 AC and wifi to the arch from my wireless network and xLights on my PC.


Reply
michaelc
Posts: 1540
(@michaelc)
Noble Member
Joined: 19 years ago
Akentut wrote:Steve, I have 5 of these currently inside a 10W RGB Floodlight. I rebuilt the rear housing and put the ESPixelstick in along with a 12v AC/DC converter. Since my landscape is run via a 12vac 300w power system, I just changed out the original 110AC to 12VDC inside the floods and replace with the 12v AC/DC which powers the ESPixelstick. Then wired it to the LED driver board.

I'll also be using these inside a 1 1/2" HDPE tube for arches, placing a 110vac to 5vdc power module and the ESPixelstick inside the tube with a ws2811 strip. Plug the arch into 110 AC and wifi to the arch from my wireless network and xLights on my PC.

Do you have pictures of the flood modification and P/S parts used?


Reply
Page 13 / 95
Share: