this looks great. I personally run to a plastic store (Tap Plastic) and buy scrap sheets of acrylic for like $1 a piece and just make my own mounting ...
Did a bit of analysis on the props I want to buy and it looks like for some the props I'll need 10cm between pixels and others 15cm. The poppers are ...
DrNeutron wrote: They were great! Wires were rather thin, but just took my time and soldered pigtails on and secured things well so nothing moved arou...
DrNeutron wrote: I bought a roll of the 3000 pebbles from Ray this year and loved them. The wire gauge is super thin, so I asked him if he could do 20...
The problem was water getting in my icicle lights. We've had tons of snow and rain here in Seattle and unfortunately the lights as designed by Ray Wu ...
Thank you for the response. I've swapped out that first icicle with multiple replacements and the problem persisted. I'm going to try swapping out the...
turns out the problem WAS my older Sandevices firmware. Upgrading to the 5.0.30 firmware solved my problem. YEAH!
Thanks, I'll look into that. Also if University Place is near Seattle, we should meet up. Looks like you're working on a matrix and I have some experi...
These lights will be inside. I guess I should start with a more fundamental question, do the popular controllers support RGBW LEDs? I have a bunch o...
