I've never used these pebble pixels and I see Ray Wu is selling them and I see some people are starting to use them. I'm hoping some of you that have used them can tell me how they've worked on in terms of reliability. In the past I've made all my own custom props. One things that super important to me is, what I'd call "storage-ability". I don't have a giant barn or garage to store all my props so it's really important to me that my props are super compact when I put them away for the rest of the year. All of my props are currently made using pixel strips not bullets, and one of the great things about using pixel strips is that my window outlines are extremely small aluminum channels that are very easy to store away.
But this year I want to add some coro props, like this one. I'm a bit concerned that these props with 200 bullet pixels is going to be fairly large (taking up lots of storage space) and a bit heavy. One idea I had, and I want to get your opinion on this is instead of using bullets I'd use use Pebble pixels instead. Ray sells these things called poppers, that look really interesting. They allow you to use pebble pixels in coro props. If the reliability were the same as bullets this would allow me reduce the weight and size of the prop (I suspect) with no downside.
So my question to you good people is...do you have experience with pebble pixels and if so how was the reliability vs bullets? Would you consider using these poppers in your coro props? Why or why not?
I am interested in how those work out for you. I got some of the pebble strings to put into my show this year. One thing I have noticed is get use to soldering. In my use case, I am only planning to use the pebbles to highlight other props, such as adding a twinkle effect to existing incandescent props.
As for whether they will work on the 35” Pixel Snowflake, they are a smaller LED so the light emitted is not as bright. For coro props, I like using 3” spaced 12mm bullets. Granted on some props, you sometimes need to extend a cable or two, but the overall prop thickness is 2.5” or less. This can be further reduced to less than 2” if you zip tie the excess pixel wire down to itself. As far as storage, I store my snowflakes on a rack I put over the garage door.
As I said, I am interested to hear the outcome of this. I am always interesting in new ideas.
-Tony
I bought a roll of the 3000 pebbles from Ray this year and loved them.
The wire gauge is super thin, so I asked him if he could do 20AWG (same as bullets) and he created a new sku for those.
When I buy more I will be using the thicker wire version for sure, just makes life easier when attaching pigtails and doing repairs.
These pebbles were 1" apart (used for matrix), 5V and I could comfortable get 180 or so without PI. I settled on 120 as that is what my design called for. They were out from Nov 28th or so till January 12th and no issues whatsoever. I live by the ocean and get alot of nasty weather, so you couldn't ask for a better stress test. We can go from plus 10 to minus 10 in less than a day, rain to snow/ice in same time period. Heck, I am in middle of a state of emergency now due to snowfall.....150cm over 4 days (59 inches for US folks).
I made a copy of the spooky tree out of 1/4" rod and attached seeds to it and it turned out awesome as well! So light and compact. I didn't get a Halloween show in time this year due to weather, but it will be in next years show.
DrNeutron wrote:
I bought a roll of the 3000 pebbles from Ray this year and loved them.
The wire gauge is super thin, so I asked him if he could do 20AWG (same as bullets) and he created a new sku for those.
When I buy more I will be using the thicker wire version for sure, just makes life easier when attaching pigtails and doing repairs.
These pebbles were 1" apart (used for matrix), 5V and I could comfortable get 180 or so without PI. I settled on 120 as that is what my design called for. They were out from Nov 28th or so till January 12th and no issues whatsoever. I live by the ocean and get alot of nasty weather, so you couldn't ask for a better stress test. We can go from plus 10 to minus 10 in less than a day, rain to snow/ice in same time period. Heck, I am in middle of a state of emergency now due to snowfall.....150cm over 4 days (59 inches for US folks).
I made a copy of the spooky tree out of 1/4" rod and attached seeds to it and it turned out awesome as well! So light and compact. I didn't get a Halloween show in time this year due to weather, but it will be in next years show.
Thanks, this is great to hear. I'll give these Pebbles a go on some of props and see how that works out and let everyone know. One problem I can foresee is that these "poppers" are made for coro only one layer thick. I'm buying 3 of the Living Light Show 35" flakes and they have sections that are 2 layers thick, making it not worthwhile to attempt to use the poppers on those, but I'll give it a shot on the others and let you all know how it goes.
Here's a link to the 20ga pebbles:
https://www.aliexpress.com/item/1005006459111913.html?spm=a2g0s.imconversation.0.0.589a3e5f0Skngp&gatewayAdapt=4itemAdapt
Looks like he is out of most for now. When I checked a month ago he had all distances available. I suspect it is due to chinese new year, everything shuts down around this time.....
