Yes. The main disadvantage is if you have a bad pixel it can take out the whole tree, but the odds are low. I debated running my pixel tree off a Pi, but I needed a controller for other display items in the close by area so I kept using a real controller.
Ron's Holiday lighting has a pixel/renard controller that works great. Has RTC as well. Used for a friend of mine for a mini tree that ran thru 10 patterns over and over on a schedule. Used X-Lights to generate fseq file the loaded FPP on Pi 3 and worked great.
Raspberry PI, Pixel Adapter
It will do 2 universes right now but more on the way.
This might be one of those...duh...questions, but it got me thinking I could get a mini-tree built this year, and use my Pi and PixelPi to drive it. So I've been tinkering in Xlights, and much like the OP, time is my enemy. I keep getting projects pushed at me....none the less, if I build a sequence for a tree in Xlights to drive the Pi, its expecting a long string of pixels, but of course they are broken up into the pieces, but Xlights maps the sequence to them knowing this. The question is wiring. To keep things simple, lets say I have 10 strings of 30 pixels so a total of 300 pixels. Does Xlights expect pixel0 to be at the bottom....then to up to the top for pixel 29, and then what...pixel30 does it start at the top and go down, or does it expect it to be at the bottom again? I'd think, it would go bottom to top....top to bottom...etc.
I used 4 strings of 50 pixels. I started at bottom and went up 25 then back down last 25 of 1st string. Then bottom of 2nd string up 25 and then back down. Told x-lights 4 strands of 50 with 2 strings in each and it did the rest. Patterns worked as they should.
Perfect...thanks!
comicrcc wrote:I used 4 strings of 50 pixels. I started at bottom and went up 25 then back down last 25 of 1st string. Then bottom of 2nd string up 25 and then back down....
I did 5 strings, each 12V ws2811 50 pixels per string, in series and used an Arduino Uno to do a RainbowCycle. It is my first pixel project. Haven't hung it up outside yet as I need to get some container for my ATX power supply and Uno. But it works fine in my "lab".

