Check the fppd.log file via the Logs tab in the FPP File Manager and see if any errors are reported there. Also make sure the FM transmitter is situa...
If you want, you could ssh into the Pi and run tcpdump and see if the blanking packet is being sent between sequences. Sync packets go out about once ...
FPP won?t send the blanking packet if the Blank Between Sequences setting is off. If it is on, then the blanking packet should be sent via FPP MultiS...
Rivy53 wrote:What do you do with the license key for wb1616? How to install? Thanks, Richard Go to the Cape Info page under the Help menu and there ...
The 2-string WS281x output channel is not affected on the Pi, only the new DPIPixels output is affected on the Pi. DPIPixels supports up to 24 string...
1pet2_9 wrote:The name David came up. Of course the FPP folks have to release the software. The 24 ports all had data and ground only, and the for...
It should not cause any issues to power off the pixels and leave the Pi powered on.
You could create the models in xLights using contiguous channels and the use Virtual Strings in FPP to put the data in the right output channels.
If you can control the smart outlets over WiFi using either HTTP or MQTT then FPP can turn them on and off via a FPP Command. My outside lights playl...
Anything running Buster has a good chance of working. We have several users running FPP inside a VM running buster. You can also run FPP under docke...
I last tested FPP_Install.sh on an Orange Pi Zero a few months ago running the FPP_Install.sh from the master branch. It is still up and running on m...
I don’t get it, are you trying to say he should have used pixels or dumb RGB instead? Which one? 🙂
Just to follow up on this to clarify the reason why in case anyone sees this and wonders. The onboard pixel outputs need to use the same PWM output t...
Are you using the onboard pixel outputs? If so, that disables onboard audio and you have to use a USB sound card.
I replied on the FalconChristmas site, but wanted to mention it here also. You want the new Virtual Display channel output in FPP which takes the mod...
