rayhjr wrote:Background only run when no other sequences are running? I would prefer to run it during a sequence. Someone pulls up at the beginning ...
With the ColorLight protocol, there is one network packet per output display row so if you use 8 outputs and 64x32 panels then that is 256 packets per...
I have been using pixels on my indoor tree for a few years now. The first year I used 200 of the technicolor “C9” pixels that I had on hand but then ...
boarder3 wrote:if i got a splitter wouldn't that reduce quality It is a digital signal, the quality shouldn’t go down unless it is actually losing s...
I would use a HDMI splitter and a single Pi. There is no guarantee that both Pi’s will be in perfect sync even with FPP MultiSync. That is what Jon ...
Rmansu02 wrote: Any ideas on how to account for time delay on the lights? Seems my lights are a half second behind where I programmed them. If it ...
I think the DAC issue is with the newer Linux kernel or Raspbian distribution that FPP uses, not really FPP itself. I didn’t see The thread on the Fa...
Dan or I may need to look at the MP3 file itself to see what is happening. The audio in FPP is decoded inside FPP and the sequence is synced to the a...
I have two brand new boxes of the white ones that I have no plans to use, I think that is 10 lights total. I imagine shipping will be a pain, in what...
Try code for the WS281x (ws2811/ws2812/etc.) and see if it works.
algerdes wrote:Not so much the quality issue, but the upcoming bump in cost, and availability because of it. Tariff time, whether we want it or not. ...
This situation appears to be resolved. Rather than providing an update in my own words, here's a link to David's forum post if you haven't seen it al...
jeremy0203 wrote:Yup it is all about the almighty $$$. That is the almighty $ in their pocket. That is why they don't care if someone uses fpp to make...
I think it should still work the same on FPP v2.1 that he is running but I will need to check the latest version after Dan’s sparse file additions to ...
aknflyer wrote:I am not sure I understand why it could be in the usb subsystem or firmware, it worked in 1.x and not in 2.x. Same pi, same hardware. O...
