Ok, so I have not been able to do a show in the past couple of years due to way too busy in life BUT i am thinking of trying to throw up a pixel megatree this year at the last minute. What I am thinking is a pixel tree and trying to find some type of stand alone controller that will just run some random patterns and designs on the tree for looks. I dont have time to do any sequencing so i am looking at something that already has some random patterns built in. I have looked at this
but from what I have read these are pretty flaky and some work and some dont.
Not sure if I can get this done but just thought I might give it a whirl as so I dont feel like I have completely stepped out of the game. Any help or advice would be appreciated.
I was able to to use an arduino based Teensy 3.1 last year tied into vixen that actually turned out to be pretty easy and required almost no creative sequencing. I was able to use the built in vixen patterns to make my tree look great last year.
CraigM wrote:I was able to to use an arduino based Teensy 3.1 last year tied into vixen that actually turned out to be pretty easy and required almost no creative sequencing. I was able to use the built in vixen patterns to make my tree look great last year.
Not familiar with Arduino.....my biggest issue is time right now as I have so little anymore but if this is something that is not a large learning curve it might be an option. What does it take to get up and going with something like this? Thanks
Hi, whilst it relies on others, a good way to go using kit that will be usefull next year would be any controller (Sandevices, Falcon etc) with a Pi running FPP and some mega tree files donated by others. I could help with some 42 pixel 32 strand squences.
You know that a raspberry pi, with the addition of a bit of wiring, a piece of perf board and a $1.50 buffer chip can run two strands of 2000 pixels (think its 2k, not positive on the absolute max).
Total cost (other than the pi) is about $5 or less. And there is nothing wasted here. The pi can be used as a master/slave pi on your full show later or it can be used to drive some elements with the addon board so its not like you are throwing money out the window and not ever being able to use the items. And if you don't use the tiny board, so what, $5. Not like you dropped $40 on something you already know to be flaky and basically useless for your show later.
That is what ran Serena's costume for halloween which is a 288 pixel matrix:

Absolutely no reason you can't slap that in a small outdoor box to run a megatree.
As for sequencing, really? It takes little time to put together a looping sequence, especially if you are not sequencing to music and just doing random effects. You should have sufficiently long loop done in an hour. Upload it to the pi and let it do its thing.
And if you give some specifics on your tree layout and what sorts of effects/look you want, I am quite sure you will find many here who will send you sequence segments you can quickly assemble or even whole sequences. I would be happy to help with this as well.

