Matrix. Please h...
 
Notifications
Clear all

Matrix. Please help

12 Posts
2 Users
0 Reactions
2,913 Views
Posts: 16
Topic starter
(@justinfougerousse)
Eminent Member
Joined: 13 years ago
[#43202]

I have a 6804 attached and running 5v 2811 pixels. When i power on the matrix lights up as a rainbow and i can no longer access my controller interface. Also the leds on the controller go dark. Any ideas


11 Replies
Posts: 16
Topic starter
(@justinfougerousse)
Eminent Member
Joined: 13 years ago

Turns out my power supply was nit keeping up. Have two 300w 5v supplies on 1080 pixels and the one board. I have adjusted voltage up but supplies keep resetting when full on white. I have to wonder if my supplies are bad. They are new so shouldnt be but just wondering if anyone had any advice. One supply runnimg 720 pixels and one running 360 and controller

Sent from my SAMSUNG-SM-G891A using Tapatalk


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

I am running 1008 pixels from 1 x MeanWell 5v power supply without power issues . Using and e682 controller .

Data rate is an issue though with the pixels I am using .

What awg wire are you using from your supply to the controller and from the controller to the pixels ?


Reply
Posts: 16
Topic starter
(@justinfougerousse)
Eminent Member
Joined: 13 years ago

Thanks for your reply. 1awg

Sent from my SAMSUNG-SM-G891A using Tapatalk


Reply
Posts: 16
Topic starter
(@justinfougerousse)
Eminent Member
Joined: 13 years ago

That was 16awg.

Sent from my SAMSUNG-SM-G891A using Tapatalk


Reply
Page 1 / 3
Share: