I finally found the problem. I use James Bolding's PX1 programming utility and no where did I see you have to put JP4 on when programming. With or w...
Yes the preview is fine.
I tried switching the 50 & 1 and no change. The 8 is the controller # in the setup list.
The lights will change per the effect just all together. One red all red.
They are changing colors per the effect just all together. If one is red all are red etc.
No problem.
I just named it PX1.
I am having problems with my PX-1's. I have 50 node strings connected to 4 px-1's. Used the utility to set 57600 baud, group size = 1, group count =...
I got the 3 in that I ordered. Built them all. Loaded new 3.rc3 and working. I want to use one with 4 universes of lights. In the capture file fro...
I am trying to run a mid sized tree with 12 strings of 50 pixels wireless with the smallest # of controllers. Any ideas? Thanks
Without looking thru all posts what is the max # universes that can be run safely? Thanks
Good Luck MrGrumpy. I could not get my RP ESP's to run more than 1 universe last year but I may not have had 2.1 software. I will locate it and upda...
Where can I get 1 or 2 of these to try????
I used 4 strings of 50 pixels. I started at bottom and went up 25 then back down last 25 of 1st string. Then bottom of 2nd string up 25 and then bac...
