Renard Pixel String...
 
Notifications
Clear all

Renard Pixel String Controller

258 Posts
50 Users
0 Reactions
121.6 K Views
boyelroy11
Posts: 757
(@boyelroy11)
Prominent Member
Joined: 17 years ago

It is possible that the programming utility you're using has the group size and group count switched. You might reverse your 1 and your 50 and see what it does.


Reply
Posts: 17
(@comicrcc)
Active Member
Joined: 12 years ago

They are changing colors per the effect just all together. If one is red all are red etc.


Reply
Posts: 17
(@comicrcc)
Active Member
Joined: 12 years ago

The lights will change per the effect just all together. One red all red.


Reply
boyelroy11
Posts: 757
(@boyelroy11)
Prominent Member
Joined: 17 years ago

It sounds like the PX-1 is programmed as a group of 50 pixels, rather than 50 individual. That's why I suggested swapping the 1 and 50 in the programming utility to see what it does.


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

what is the 8:1 in xlights start ch should be like 3583


Reply
Page 51 / 52
Share: