ended up being my solder job that was the issue, but looks as if i will need a 2nd controller for the last strip of LEDs to work
All of the solder points look good, but it's possible something is missing since all 8 of them are not working. Guessing there is 1 solder point that ...
pmiller wrote:Do the test using the web setup work all the Lights? Sent from my SM-T710 using Tapatalk all off them work except for the ones hooke...
pmiller wrote:I know this is probably a dumb question but sometimes it's the simplest things that are missed. Do you have power going to both sides of...
That does make sense, and I am able to get it to work in Vixen now something with 3-1 - 3-4, and 4-1 - 4-4 isn't working. tried all 8 and get nothing
pmiller wrote:Your configuration setup should be like this: Start 1 universe 1 size 510 Start 511 universe 2 size 510 Start 1021 universe 3 size 510 S...
pmiller wrote:Seems your setup is wrong. First output: Start universe 1, Channel 1, End universe 6 channel 42 Second output: Start universe 6, channel...
Here are both I am able to get the first 12 strings to light up, but am trying to get them in grid formation in a zig zag
Pixels and strips still availableGrid is sold make an offer as i need to get rid of them
5V WS2811 12mm RGB pixels.
I see there is also a way to use Renard via Arduino. Does anyone happen to have the sketch for an Arduino? From there i can get a Network Shield.
