Notifications
Clear all

E682 help

29 Posts
5 Users
0 Reactions
6,510 Views
Posts: 15
Topic starter
(@rbf351)
Eminent Member
Joined: 11 years ago
[#42616]

trying to see if this is possible of if i am doing something wrong

I am trying to hook up 2160 pixels to 1 E682 controller

the way i currently have it wired is the following

they are 144 pixel strings

i have 6 strings tied together for the first 2 sets, the last set is 3 strings

I hooked up 864 to the first output, 864 to the 2nd output, and 432 to the 3rd output

I am able to get the first 864 lit in vixen, but the rest fail to light up. When using the E682 web page i can light all 2160 with no issues. Am i doing something wrong in Vixen?


28 Replies
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

Need screenshots of your E682 setup and your Vixen setup


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

The 682 will only control up to 2,040 individual pixels using Unicast E1.31 or Art-Net, 1,190 pixels using Multicast E1.31

Sent from my SM-T710 using Tapatalk


Reply
Posts: 15
Topic starter
(@rbf351)
Eminent Member
Joined: 11 years ago

Here are both

I am able to get the first 12 strings to light up, but am trying to get them in grid formation in a zig zag

Vixen
Sandevice

Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Seems your setup is wrong.
First output: Start universe 1, Channel 1, End universe 6 channel 42
Second output: Start universe 6, channel 43, end universe 11 channel 84
Third output: Start universe 11, channel 85, end universe 12 channel 474

If you want zig zag click the appropriate box on the right where it says first zig and then tell it how many after that to zag. Example. I have a 8 strings of 100 but I have 50 going up and 50 going down. I set the first zig to 50 and then every 50 after that. Make sure you hit save whenever you make a change.


Reply
Page 1 / 6
Share: