maximum current thr...
 
Notifications
Clear all

maximum current through a F16V2-R

15 Posts
6 Users
0 Reactions
4,267 Views
Posts: 236
Topic starter
(@afremont)
Reputable Member
Joined: 10 years ago
[#42622]

I can't find any electrical specs telling me how much current I can safely distribute from my new Falcon 16. I see that each string port has a 5A fuse, and I know that 8 strings ports are supplied by each power input connector (V1 and V2). Does this mean that I can safely distribute 40A from each power bus? I don't see any input fuse on the power connectors, so I'm curious as to what is safe and won't blow out drivers on the controller or burn up the traces on the circuit board.

I'm going to be using 5V strings.


14 Replies
stallionent
Posts: 1460
(@stallionent)
Noble Member
Joined: 13 years ago

I used 30 amp circuit breakers from power supply to F16. https://www.delcity.net/store/search/p_198672.h_201365.t_1.n_y.jsp?item=75135


Reply
Posts: 236
Topic starter
(@afremont)
Reputable Member
Joined: 10 years ago

Thanks stallionent, looks like the string plugs have an 18A rating, so 5A fusing is conservative. The V1and V2 connectors look to be heavier duty, but I haven't found the specs for them yet. My real concern now is the circuit board traces and how much they can take. I mentioned drivers earlier, but that's my own ignorance from not looking at the board hard enough and missing the fact that the power buses don't have any ICs or other switching components in them, they seem to just run straight to the outputs so that leaves the board traces as the main concern.

Sent from my Moto G (4) using Tapatalk


Reply
Posts: 236
Topic starter
(@afremont)
Reputable Member
Joined: 10 years ago

BTW, thanks for the link. I haven't even powered my board up yet. I spent time researching the jumper settings. I'm still looking for info on the rs485 outputs and how they play into all this.

Sent from my Moto G (4) using Tapatalk


Reply
stallionent
Posts: 1460
(@stallionent)
Noble Member
Joined: 13 years ago
Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

Go to http://nutcracker123.com/nutcracker/rgb_controllers/ and it shows f16v2 rated for 30A per bank. Look at row pw2

Sent from my iPhone using Tapatalk


Reply
Posts: 236
Topic starter
(@afremont)
Reputable Member
Joined: 10 years ago

Thanks guys, I really appreciate it. Now I wonder if I can get away with using 10A fuses, if I keep it to two or three strings per bank.

Sent from my Moto G (4) using Tapatalk


Reply
stallionent
Posts: 1460
(@stallionent)
Noble Member
Joined: 13 years ago

I don't see the benefits of 10A fuses. Why not 30A.


Reply
Posts: 236
Topic starter
(@afremont)
Reputable Member
Joined: 10 years ago

I'm trying to spread the load on the outputs. I have 150 pixel 5V ws2811b LEDs. At 60mA each, that works out to 9A per string. They work fine full white being powered from one end using an Arduino and fastLED library with a modified PC supply. I'm not sure they draw a full 160mA per LED so it should be less than 9A per string.

Sent from my Moto G (4) using Tapatalk


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago

How is a fuse going to spread out the load?

Any specific Falcon questions should be asked on the Falcon forum, or call Dave directly, his number is on the website.

Sent from my SM-G900V using Tapatalk


Reply
Page 1 / 2
Share: