Not sure what to look for... it does not seem that the stick is communicating.
Here is the error message:
-= Building SPIFFS Image =-
bin/win/mkspiffs.exe -c spiffs/ -p 256 -b 4096 -s 131072 firmware/spiffs.bin
/config.json
/www/admin.html.gz
/www/config_net.html.gz
/www/config_pixel.html.gz
/www/config_serial.html.gz
/www/pixel.html.gz
/www/script.js.gz
/www/serial.html.gz
/www/status_e131.html.gz
/www/status_net.html.gz
/www/style.css.gz
-= Programming ESP8266 =-
bin/win/esptool.exe -cd none -cb 115200 -cp COM3 -ca 0x000000 -cf firmware/pixel-2.0-1m_128k.bin -ca 0xDB000 -cf firmware/spiffs.bin
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
PROGRAMMING FAILED
Device manager sees the adapter:
I am using the USB-TTL Adapter (CP2102) from the DIGWDF store which I have used before to program some Renard_Plus_WifiPixel so I assume that the adapter is working
http://digwdf.com/store/product.php?id_product=178
I thought maybe the ESP-01 module could be bad and swapped it with another but same result.
Any idea what to look for? thanks!
Do you see anything in the serial monitor window? Try swapping tx and rx cables. Can also program it in your renplus board then move the module.
Sent from my XT1094 using Tapatalk
First I would say....Use the RP_WiFiPixel to program the ESP-01, then put it in your ESPixelStick
Also, try swapping the Rx & Tx on the ESPixelStick
Try ESPixelStick_Firmware-2.0 to program ESPixelStick - super Java Based programmer
https://github.com/forkineye/ESPixelStick/releases/download/v2.0/ESPixelStick_Firmware-2.0.zip
[ hmmm....I guess you need to hit post reply before you answer the phone. ]
Right on target! Swapping Rx and Tx cables is all what it took to solve the issue (there was nothing in the serial monitor window). Thanks a lot Shelby and mrGrumpy for the quick responses.
BTW, the flash tool is awesome!
I am having similar issue as Bernard
But I tried switching cables to no avail
"WARNING:
Failed esptool
Failed to program the ESP8266
Verify your device is properly connected and in programming mode.
When I click ok.
I get the following in the Status window:
-= Building SPIFFS Image =-
bin/win/mkspiffs.exe -c spiffs/ -p 256 -b 4096 -s 131072 firmware/spiffs.bin
/config.json
/www/admin.html.gz
/www/config_net.html.gz
/www/config_pixel.html.gz
/www/config_serial.html.gz
/www/pixel.html.gz
/www/script.js.gz
/www/serial.html.gz
/www/status_e131.html.gz
/www/status_net.html.gz
/www/style.css.gz
-= Programming ESP8266 =-
bin/win/esptool.exe -cd none -cb 115200 -cp COM3 -ca 0x000000 -cf firmware/pixel-2.0-1m_128k.bin -ca 0xDB000 -cf firmware/spiffs.bin
error: failed reading byte
warning: espcomm_send_command: can't receive command response header
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
PROGRAMMING FAILED "
Please help.
-bernard- wrote:Not sure what to look for... it does not seem that the stick is communicating.Here is the error message:
-= Building SPIFFS Image =-
bin/win/mkspiffs.exe -c spiffs/ -p 256 -b 4096 -s 131072 firmware/spiffs.bin
/config.json
/www/admin.html.gz
/www/config_net.html.gz
/www/config_pixel.html.gz
/www/config_serial.html.gz
/www/pixel.html.gz
/www/script.js.gz
/www/serial.html.gz
/www/status_e131.html.gz
/www/status_net.html.gz
/www/style.css.gz-= Programming ESP8266 =-
bin/win/esptool.exe -cd none -cb 115200 -cp COM3 -ca 0x000000 -cf firmware/pixel-2.0-1m_128k.bin -ca 0xDB000 -cf firmware/spiffs.bin
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failedPROGRAMMING FAILED
Device manager sees the adapter:
I am using the USB-TTL Adapter (CP2102) from the DIGWDF store which I have used before to program some Renard_Plus_WifiPixel so I assume that the adapter is working
http://digwdf.com/store/product.php?id_product=178I thought maybe the ESP-01 module could be bad and swapped it with another but same result.
Any idea what to look for? thanks!
StoneLoveLights wrote:I am having similar issue as BernardBut I tried switching cables to no avail
"WARNING:
Failed esptool
Failed to program the ESP8266
Verify your device is properly connected and in programming mode.When I click ok.
I get the following in the Status window:
-= Building SPIFFS Image =-
bin/win/mkspiffs.exe -c spiffs/ -p 256 -b 4096 -s 131072 firmware/spiffs.bin
/config.json
/www/admin.html.gz
/www/config_net.html.gz
/www/config_pixel.html.gz
/www/config_serial.html.gz
/www/pixel.html.gz
/www/script.js.gz
/www/serial.html.gz
/www/status_e131.html.gz
/www/status_net.html.gz
/www/style.css.gz-= Programming ESP8266 =-
bin/win/esptool.exe -cd none -cb 115200 -cp COM3 -ca 0x000000 -cf firmware/pixel-2.0-1m_128k.bin -ca 0xDB000 -cf firmware/spiffs.bin
error: failed reading byte
warning: espcomm_send_command: can't receive command response header
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failedPROGRAMMING FAILED "
Please help.
Try swapping RX and TX as well. When you reset the module, do you see anything in the serial monitor?
What is the means of power supply you guys are using for programming the ESPixelStick-V2?
Hi Sporadic ... noting displayed in the serial monitor
StoneLoveLights wrote:What is the means of power supply you guys are using for programming the ESPixelStick-V2?
5V or 12V to the input V+ V- on bottom of board. ESP Red light must be on.
StoneLoveLights wrote:Hi Sporadic ... noting displayed in the serial monitor
Not sure if this will help you but I got this same error when I tried to connect my programmer to my computer with a 6 foot USB cable.
"WARNING:
Failed esptool
Failed to program the ESP8266
Verify your device is properly connected and in programming mode.
I went back to having the programmer plugged into the computer directly and it works fine. Just my experience with it.



