Looks like I have a bad GFCI. Yesterday I ran the extension cords from my controllers to a different GFCI protected circuit in my garage and they ran...
tonydoeslights wrote:The data lines are 18 AWG stranded right now. I'll try cat 5. Would it be possible to run multiple data lines on the same etherne...
ukewarrior wrote:Wow. that is a very nice adapter you designed. did you print it in PLA or ABS? I just got my printer a little more than a month ag...
RogerH wrote:I use cat5/6 cable for the data and separate power cables. Signal and ground from the controller output. Try that, it will probably fix t...
Emuney18 wrote:Did I miss this. Have you tried running both data and a ground from the controller to first node? Everything is fully wired as I show...
MartinMueller2003 wrote:This sounds more and more like a grounding issue. That's what I was thinking but I've confirmed that all the power supply gr...
MartinMueller2003 wrote:Two of the outputs on my F16V2 require me to put a null pixel within a foot of the output to prevent flickers. Not worth track...
tucsonlights wrote:Do you have access to a uamp? It is a tiny little device that cleans and propagated the data signal. You don't have to account for ...
TomL8345 wrote:I had a similar problem when I was wiring my StarFlake Spinner. It turned out to be a Ground wire issue. I had to run a continuous gr...
Here's a video showing the pixels flashing on/off randomly when the controller is on but no sequence is playing and it's not in a test mode. This see...
