MrDudeMan wrote:how long is the data wire from controller to first pixel. since you are testing right now, do you have the data wire coiled up on a s...
Barnabybear wrote:Hi, it could be volt drop in the cables. To check just try one string of 90 pixels powered up, if that cures the problem add more on...
TazChaLet wrote:did you buy the rainproof power supplies from HC? Yes.
pmiller wrote:If you have the power set to 12 volts lower it. Try 11.8 volts. I've had issues in the past and lowering the output voltage cleared it u...
b0nafide wrote:What's your order number? I'm curious if he's filling orders sequential? My order number was #6673, which I placed on 1/27/17. I thi...
b0nafide wrote:This has gone on long enough ... I'm wondering if I will actually get my pixels? I received two shipping notifications on Saturday an...
I'm thinking I'm screwed out of $1400 and Halloween and possibly Christmas are now up in the air. I haven't gotten any emails whatsoever about my ord...
Sounds like grblShield and grbl have some pretty solid capabilities, more than what I saw online at first. For bigger machines I think having acceler...
I just did a quick look at grblShield/gshield and see a number of potential gaps as compared to using Mach 3 and a more robust controller for larger m...
Jon - Building an 8x4 version of a Joes CNC wouldn't cost much more than the standard 4x4. You'd have to add 4 feet to the base, Y-axis rails (80/20...
If you want to make a DIY CNC Router and want to cut 4x4 sheets (or other big stuff): You can make the base out of wood, steel or Unistrut. The pl...
Yes - done some lithophanes and a terrain file in 2.5D. When you're creating your toolpath are you using either the 3D Roughing Toolpath or the 3D Fi...
LightUp wrote:@mtbehnke whatCAD/CAM software did you use for the artwork? I have MeshCAM6 and TurboCAD but need to learn how to use it. I used Aspir...
Had some fun using the CNC to make stuff for this Halloween - didn't know about pixels / DIY lighting so next year I'll be thinking much bigger.
