holtm
@holtm
Honorable Member
Joined: May 29, 2007
Last seen: Nov 17, 2026
Topics: 47 / Replies: 417
Reply
RE: Power Injection Method with a Parallel power line. Will this work well?

First, you would need a ground wire in parallel too. Second, you would likely need very large wires for the injection, especially the wire closest to ...

10 years ago
Reply
RE: Vast FM212

How are you connecting it to the Micca Media Player? How are you powering the Vast? In my experience, the Vast is expecting USB audio or analog via th...

10 years ago
Forum
Reply
RE: Not fadeing

Yes, non zero cross or random cross. Very brief explaination... The Solid State Relays (actually the opto-isolators in them) come in zero-cross and ...

10 years ago
Forum
Reply
RE: Not fadeing

Looks like they are zero-cross Solid State Relays, so they won't dim/fade. Just on/off

10 years ago
Forum
Reply
RE: Static Interference with Pixels?

I had the same problem with my belkin. It was behind the lights and sounds ok from the house, but in the street it was very noisy with the pixels on v...

11 years ago
Forum
Reply
RE: DIY LED Express 2016 Pre-Sale Information!

Two questions about the 3 wire connectors. 1. Are the 3-wire connectors this year going to be compatible with previous years? 2. Are the 3-wire conne...

11 years ago
Reply
RE: Fast Snow Fall

I'm guessing my segments are shorter; assembled length is about 4 feet.

11 years ago
Forum
Reply
RE: Dead Pixels?

It likely either #33 (not sending data) or #34 (not using/send on the data correctly). The rest of the string are likely still good.

11 years ago
Reply
RE: New-ish and have some Renard Questions

Depending on the LEDs, they will be dimable with the plus 32 and the DirkCheap SSRs. There are some non dimable LED strings out there. With LEDs, I fo...

11 years ago
Reply
RE: Ready to jump in with both feet ok maybe just one foot...

+1 on Renard SS series with a bridge. It's a good way to go. It makes communication from the computer easy for the Renard and provides some flexibilit...

11 years ago
Reply
RE: Noob Power question

Most likely yes. However, it depends on the capacity of the supply and the current draw of the pixels.

11 years ago
Reply
RE: RenardESP Information Thread

Yes, a couple of times. I saw it show up once briefly, then by the time I tried to connect to it, it was gone. I figured it needed more power so tried...

11 years ago
Forum
Reply
RE: RenardESP Information Thread

This might help someone else, it would have saved me about an hour..... I received two from the group buy and assembled one of them. I programmed it ...

11 years ago
Forum
Reply
RE: LOR USB Adapter-->LOR Controller-->LOR Controller-->Renard 32 Plus-->Renard Plus SSRs

Re: LOR USB Adapter-->LOR Controller-->LOR Controller-->Renard 32 Plus-->Renard Plus Yes, the activity light blinks without any SSR connected on my r...

11 years ago
Forum
Reply
RE: REN 48 LSD issues

Could be the pic or solder joint. Also, check the power to both sides of the board. As I recall the ren48lsd has two power in terminals for two halves...

11 years ago
Forum
Page 4 / 31