I've been using a Vast FM02 for about three years and have been very happy with the sound quality. This last season I added about 2500 pixels to the display but notice some static interference in the broadcast signal. Do pixels generate interference to the signal? It seams to generate interference while running chases on the pixels or with a large amount of White pixels while at other time the signal is very clean.
I have a Sure Electronics voltage regulator and a number of ferrite beads in the lines. I also have the FM02 plugged in to a separate 115v circuit from the controllers. Was going the build a custom dipole antenna as my next step in lieu of the standard wire whip that came with the FM02.
I don't think its your pixels... I think it is the power supplies that power your pixels, some of the cheap power supplies are prone to this issue. I am not the most knowledgeable about this so I will give you this link: http://www.samlexamerica.com/support/faqs/faq18.aspx
Hope this helps!
Thanks..... my E1.31 bride and a power supply were only a couple of feet from the transmitter. Diffidently going to do some more experimenting.
I had the same problem... I had the vastfm powered by my rasberry pi... When I have the fm transmitter it's own power supply, it removed the static.
Sent from my SAMSUNG-SM-G890A using Tapatalk
I had the same problem with my belkin. It was behind the lights and sounds ok from the house, but in the street it was very noisy with the pixels on very bright. Plus it changed depending on which pattern was on. I moved it to the side of the display and most of the noise was gone. Next year I'm going to get a higher power transmitter and leave it to the side or in front.
