Activity
 
Notifications
Clear all
ezellner
@ezellner
Prominent Member
Joined: Jan 28, 2016
Topics: 11 / Replies: 729
Reply
RE: Networking/Sandevices guru please

Daemon wrote:Hey So. My settings are Fpp on RPi 3b+ ver. 4.6.1 192.168.15.x is my home network 192.268.2.x is my show network No separate show router...

5 years ago
Reply
RE: E682 Maximum Output

It is not difficult to add another E682. I have several.

5 years ago
Reply
RE: Help With 2nd E682

I second gassy's comments about the solder joints. Redo them and also make sure you don't have any bridged solder joints as well.

5 years ago
Reply
RE: FPP install help required

bcer960 wrote:ok, sorry to ask for more but I understand because the E682 is on a different subnet (.2) I cannot talk to it through my laptop anymore....

5 years ago
Reply
RE: Displays not showing up for sequences

Agree with Mike Krebs. Elements don't show in sequencing screen until you preview the sequence. They do show in the setup preview screen.

6 years ago
Reply
RE: Colorlight 5A-75B Panel Controller help

See the second part of this video. It should help get you started.

6 years ago
Reply
RE: What causes WS2811 flickering?

asago wrote:I'll get the terminology right eventually (noob) - I'm outputting to a couple nodeMCUs flashed w/ WLED.. and again, it's just the 12v pixe...

6 years ago
Reply
RE: Happy Birthday dirknerkle

Happy birthday, Dave! Thanks for all you have done and all you do for this hobby! Love your sense of humor.

6 years ago
Forum
Reply
RE: How many panels for sign?

I use 4 - 32 by 32 P6 panels for a 32 by 128 scrolling "Tune to..." sign.

6 years ago
Reply
RE: Will DC voltage Cause GFCI Trips?

Have you ever replaced your outlet? They can go bad and can trip more easily. Also make sure you have a weather resistant one installed which will als...

6 years ago
Reply
RE: Mapping snowflakes in Vixen

Something may still need tweaking in your set up. I have snowflakes with 174 pixels each and they wipe as expected. I am using 3.7u4 at the moment alt...

6 years ago
Reply
RE: Mapping snowflakes in Vixen

Not sure which effect you are referring to when you say star burst but many of the effects have a depth parameter. Changing that will change how group...

6 years ago
Reply
RE: Max distances from controller to pixels

My experience is that 30' is a good number. However, by installing a buffer/line driver, you can get at least 50' (my current maximum). I had issues b...

6 years ago
Reply
RE: PixelTrim vs. ChromaTrim

I have only used ChromaTrim for my eaves, verticals and roof peak and found it works really well for my application.

6 years ago
Page 2 / 50
Share: